Abstract
A kind of novel composite filler was designed using FeCoNiCrCu high entropy alloy and pure Ti foil. ZrB2SiCC ceramic and GH99 superalloy were brazed with the composite filler. The interfacial microstructure as well as brazing mechanism was investigated. The mechanical properties were also assessed. The results show that the high entropy mixing effect of the Ti/FeCoNiCrCu composite filler keeps the activity of Ti and Cr. The solid solution forms as the matrix of brazing seam. The phase structure of (TiB+CrB)/solid solution promise a good bond between ZSC and GH99. The interfacial reaction is affected greatly by the brazing parameters, because the activity of Ti and Cr is changed. The maximum shear strength reaches 71MPa when the joint is brazed at 1180°C for 60min. Cracks primarily propagate in the ZSC away from the reaction zone.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.