Abstract
A low-noise amplifier (LNA) topology with tunable input matching and noise cancellation is introduced and described in this paper, which was designed and optimized to interface with a magnetoelectric (ME) antenna in a 0.35 µm MEMS-compatible CMOS process. Compared to conventional antennas, acoustically actuated ME antennas have significantly smaller area for ease of integration. The LNA was simulated with an ME antenna model that was constructed based on antenna measurements. Input matching at the LNA-antenna interface is controlled with a circuit that varies the effective impedance of the gate inductor using a control voltage. Tunability of 455 MHz around 2.4 GHz is achieved for the optimum S11 frequency with a control voltage range of 0.3 V to 1.2 V. The proposed LNA has a noise cancelling feedback loop that improves the noise figure by 4.1 dB. The post-layout simulation results of the LNA show a 1-dB compression point of -7.4 dBm with an S21 of 17.8 dB.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
