Abstract
AbstractUsing an instrumented tablet press, compression force-time measurements were used to evaluate the effects of formulation and processing variables on the compaction process. The effects of tablet press speed, punch size, depth of upper punch penetration (into the die), and the setting of the overload spring mechanism were studied. The effects of tablet weight, particle size and amount of lubrication were also studied. Several direct compression materials which are believed to compact by different mechanisms were used in the study. The results indicate the sensitivity of the area under the compression force-time curve and the Area/Height ratio. Some of the changes seen in the area and A/H ratio were those which would be expected from a relatively simple model of compaction/compression. The results clearly show the usefulness of the instrumented tablet press as an analytical tool in the development of tablet formulations, the evaluation of processing requirements, and the remedy of tablet production ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.