Insight into Greenhouse Gases Emissions and Energy Consumption of Different Full-Scale Wastewater Treatment Plants via ECAM Tool.

Abstract

Greenhouse gas (GHG) production is one of the urgent problems to be solved in the wastewater treatment industry in the context of “carbon neutrality”. In this study, the carbon emissions and energy consumption of typical wastewater treatment processes in China were evaluated, starting from different cities and water treatment plants. Tool of Energy Performance and Carbon Emission Assessment and Monitoring (ECAM) was used. By comparing the influent BOD5, it was found that the energy consumption for wastewater treatment was positively correlated with the influent organic load. The annual CH4 emission of Xi’an WWTP can reach 19,215 t CO2eq. Moreover, GHGs are closely related to the wastewater treatment process chosen. WWTP B of Kunming used only an anaerobic process without continuous aeration, with an average monthly energy consumption of 8.63 × 105 kW·h. The proportion of recoverable biogas was about 90% in the GHG discharged by the traditional process. However, the anaerobic digestion-thermoelectric cogeneration process can make the recovery of the biogas utilization ratio reach 100%. Compared to the Shuozhou WWTP and WWTP A of Kunming, the Strass WWTP served the smallest population and had the largest treatment capacity, reaching the lowest energy consumption, consuming only 23,670 kW·h per month. The evaluation and analysis of ECAM provide data support and research foundation for the wastewater treatment plants to improve energy utilization and reduce greenhouse gas emissions.