Abstract

Effects of catalyst loading amount, reaction temperature, O2 concentration, NH3/NO molar ratio and SO2 on low-temperature catalytic performance of the Mn–La–Ce–Ni–Ox (Mn/La/Ce/Ni=2.5:2.5:1:1 in mol)/PPS for NH3-SCR of NO were mainly studied. Results showed that the filter with catalyst loading amount of 250g/m2 obtained more than 95% NO removal efficiency at 200°C under filtration velocity of 1m/min. The NO removal efficiency was still above 85% by injecting 300ppm SO2 at 200°C. Anyway, the Mn–La–Ce–Ni–Ox/PPS catalytic filter is promising to achieve the expectation of simultaneous removing particulate and NOx from low-sulfur flue gas in cement kiln.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.