Abstract
ZrO2(Y2O3)-Al2O3-SrSO4 nanocomposites incorporated with and without Ag addition have been fabricated by spark plasma sintering (SPS) to evaluate their friction and wear properties in sliding against alumina ball from room temperature to 600 oC. X-ray diffraction (XRD), scanning electron microscope (SEM) and Raman spectroscopy were used to investigate microstructure and self-lubrication mechanisms of nanocomposites after wear tests at different temperatures. The ZrO2(Y2O3)-Al2O3-SrSO4 nanocomposite exhibits low and stable friction coefficients of 0.2 to 0.3 and wear rates in the order of 10-6 mm3/Nm at high temperatures. With the addition of Ag into the composite, the intermediate temperature lubricating property is greatly improved. Plastic deformation of SrSO4 and sliver during sliding plays an important role in formation of lubricating films on worn surfaces of nanocomposites. These lubricating films reduce the friction and wear of the ZrO2(Y2O3)-Al2O3 matrix composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
