Abstract
Threads of modern pedicle screws can vary greatly in design. It is difficult to assess which interplay of design features is particularly advantageous for screw anchorage. This study aims to increase the understanding of the anchorage behaviour between screw and cancellous bone. Pull-out tests of six pedicle screws in two sizes each were performed on three densities of biomechanical test material. More general screw characteristics were derived from the screw design and evaluated using the test data. Selected screws were tested on body donor material. Some screw characteristics, such as compacting, are well suited to compare the different thread designs of screws with tapered core. The combination of two characteristics, one representing bone compacting and one representing thread flank area, appears to be particularly advantageous for assessing anchorage behaviour. With an equation derived from these characteristics, the pull-out strength could be calculated very accurately (mean deviation 1%). Furthermore, findings are corroborated by tests on donor material. For screws with tapered core, the design demands for good anchorage against pull-out from cancellous bone change with material density. With sufficient bone quality, screws with a high compacting effect are advantageous, while with low bone density a high thread flank area also appears necessary for better screw anchorage.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
