Abstract
In bubble column bioreactors, the hydrodynamic behavior like mixing time, bubble size and morphology of filamentous fungi are influenced by the construction of spargers. Sparger pore size is an important factor influencing formation of bubbles. In this study for the first time, a 5-L bubble column bioreactor with different porous spargers was used to investigate the effect of mean air bubble diameter (at 0.36, 0.18 and 0.09cm) on fungal growth, broth viscosity, fungal pellet morphology and lovastatin production by the filamentous fungus Aspergillus terreus. All cultivations were carried out at air flow rate equal to 0.5 Lair L-1min-1. The viscosity of the broth was influenced by both biomass concentration and size of the fungal pellets. The highest values of viscosity were observed at bubbles of 0.09cm diameter after 192h of cultivation. The largest fluffy pellets and the highest yield of lovastatin (443mg/L) were obtained at air bubbles diameter of 0.18cm. Lovastatin yield on biomass growth in this condition was, respectively, 1.7-fold and 3.5-fold higher than in the cultivations performed with air bubbles of 0.36 and 0.09cm diameters. These laboratory scale experiment indicates that air bubble diameter has the impact on lovastatin production and A. terreus culture conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
