Abstract

Abstract The temperature and frequency dependence of the AC conductivity σac(ω), the dielectric constant e′(ω) and the dielectric loss e″(ω) were studied on pellet samples of nickel phthalocyanine (NiPc) with evaporated ohmic Au electrodes in the frequency range from 20 kHz to 10 MHz and within the temperature range from 303 to 600 K. The DC conductivity σdc has also been measured in the considered range of temperature. Two temperatures – induced changes in the thermal activation energy ΔE have been observed. For T ⩽ 435 K, ΔE1 = 0.322 eV; for 435 K ⩽ T ⩽ 525 K, ΔE2 = 0.497 eV; for T ⩾ 525 K, ΔE3 = 0.703 eV. These variations in the activation energy were attributed to a partial phase transformation from α- to β-NiPc phase and as a change from extrinsic to intrinsic conduction mechanism. The AC conductivity σac(ω) showed temperature independence and it has been found to vary with angular frequency as ωs with the index s ⩽ 1 suggesting a hopping conduction mechanism at low temperatures and high frequency. At higher temperatures and lower frequencies a free-band conduction mechanism was observed. Both the dielectric constant e′(ω) and the dielectric loss e″(ω) increased with temperature and decreased with frequency in the investigated ranges. Such characteristics, reveal that the tested organic NiPc exists in the form of molecular dipoles which remain frozen at low temperature, whereas at higher temperatures, when the dipoles attaining rotational freedom, the dielectric constant was found to decrease with increasing frequency and increase with increasing temperature. The increase in the dielectric loss e″(ω) with increasing temperature at low frequencies can be understood in terms of an increase in DC conductivity.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.