Abstract
Three-dimensional two-phase flow in the typical double downside 90°afterburning chamber of boron based ducted rocket is numerically simulated by means of Realizable turbulence model, one-step eddy-dissipation combustion mode1 and the ignition and combustion mode of boron particles of KING with considering the film moving effect in the high-speed flow. The results show that co-swirl and counter-swirl air in the double side of inlet enters into afterburning chamber to make mixture of air and gas more fully and combustion efficiency increases with the increase of swirl number. Boron particles and total combustion efficiency with co-swirl is higher than counter-swirl when the swirl number is less than 0.179. On the contrary, the counter-swirl is higher than co-swirl when the swirl number greater than 0.385, the co-swirl is balance to the counter-swirl when the swirl number is about 0.2; the ignition time of boron particles is reduced with swirling air, its minimum can be attained when swirl number is 0.385.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
