Abstract
0.6 mol % V2O5-doping 0.996(0.95Na0.5K0.5NbO3–0.05LiSbO3)–0.004FeBiO3 ((KNN–LS–BF)–V2O5) piezoelectric ceramics were synthesized by the conventional solid-state reaction process. The influence of sintering temperature on structure and properties of (KNN–LS–BF)–V2O5 ceramics were studied. The results show that the sintering temperature has significant influence on crystal structure, density and properties. The specimens sintered at 1040–1100 °C all are perovskite structure mixed with orthorhombic symmetry phase and tetragonal phase, but the crystal lattice constant and the grain size both become smaller as the sintering temperature increasing. With the increase of sintering temperature, the d33, kp, er, tanδ, Qm exhibit different variation trend and have been improved obviously due to the enhance in density when the sintering temperature is 1080 °C, but too high sintering temperature would degrade their kp and tanδ. The (KNN–LS–BF)–V2O5 ceramics with the optimum combination properties can be synthesized at 1080 °C, relating constants as d33 = 161pC/N, kp = 0.30, er = 1057, tanδ = 3.92 %, Qm = 58.95, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
