Abstract
Simulation experiment was done to investigate the effects of rare earth on hot-dipped Zn-55%Al alloy coating. The results show that the rare earth has little effect on the zinc dross and its burning loss is about 10%. The microstructure of coating is similar to that of solidification bath, and which is made up of phases of rich aluminum, rich zinc, rich silicon and rare earth, and intermetallic layer of Al-Zn-Fe-Si. The rare earth phase is needle or rod, and mainly distributed inside rich zinc phase and on the interface between the coating and steel substrate. The rare earth has no obvious influence on coating grain and spangle size. The appropriate addition of rare earth would be helpful to improve the coating bending formability and corrosion resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
