Influence of NaOH concentrations on synthesis of pure-form zeolite A from fly ash using two-stage method

Abstract

Synthesis of pure-form zeolite A were investigated using four concentrations of NaOH solution to dissolve Si source form fly ash, and with the addition of Al source, to prepare initial gel. Experimental results demonstrated, for two-stage method, that NaOH concentrations in initial gel played an important role in synthesis of pure-form zeolite A using fly ash as raw materials. Generally, pure-form zeolite A could be synthesized when following conditions were used: NaOH concentrations, 1.67, 5 and 6.67 M; the synthesis temperature, 100 °C; the corresponding crystallization time, 340, 250 and 190 min. However, a mixture phases of zeolites A and X were obtained at the condition of 3.33 M NaOH solution during various crystallization times. It was found that the higher NaOH concentration was used, the shorter crystallization time of zeolite A was required and the narrower particle size distribution of zeolite A was achieved. In addition, zeolite A submicron-crystals were first synthesized from fly ash using two-stage method in our study.