Abstract
The mechanical properties of isotactic polypropylene (iPP) and propylene-ethylene block copolymer (Co-PP) with carbon black (CB) were added as a filler. By mixing appropriate amounts of the two components through melt-blending in a twin-screw extruder, the blended pellets were prepared to a series of test specimens by injection molding. A scanning electron microscopic study was performed of the morphologies of the impact fractured surfaces. The blending of CB in Co-PP not only improves the impact strength, but also improves the flexural modulus and tensile strength; however, the heat distortion temperature (HDT) of the Co-PP/CB blends decreased with greater filler content. Furthermore, the filler of CB improves the tensile yield strength only at low filler content in iPP/CB blends, and the heat distortion temperature (HDT) and flexural modulus of the iPP/CB blends increased with greater filler content. The impact behavior is not good for the iPP/CB blends. Overall, Co-PP/CB has better interaction of molecules than iPP/CB. © 1996 John Wiley & Sons, Inc.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
