Abstract
Abstract The percolative behavior of PVDF–Ag composites obtained using external mixing of PVDF with pre-made Ag and in situ formed Ag were studied. Composite prepared by the in situ formation of Ag had a percolation threshold of 7 vol% as against 13, 14, and 16 vol% for composites prepared by ultrasonic mixing pre-made Ag powders of about 100 nm, 3.5 μm and 5 μm respectively with PVDF. The homogenous dispersion of in situ Ag nanoparticles in PVDF leads to percolation at lower filler loading. The observed variations in dielectric properties are explained based on size and extent of agglomeration of Ag and method of preparation of the composites. The influence of matrix characteristics on the properties of composite is also brought out.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.