Abstract
Elastomeric bearings (rubber bearings) have been used in highway pseudo-continuous bridges without joints changed from simple girders to reduce the environmental influence of traffic-induced vibration. In addition, elastomeric bearings have been adopted in simple girder bridges for base isolation systems of earthquakeproof structures. Three-dimensional analysis of dynamic response of bridges under moving vehicles is carried out to examine the change of dynamic response in bridges caused by replacing steel bearings with elastomeric bearings. Analytical results are compared with experimental results in urban highway bridges. It is not shown clearly in experiments that natural frequencies are changed slightly in analysis by replacing steel with elastomeric bearings. Although vertical displacements of main girders at the span center do not almost change between steel and elastomeric bearings, horizontal displacement in the bridge axis direction becomes larger with elastomeric bearings. For the evaluation of the experimental acceleration of the ground motion, the dynamic reaction force is analyzed and the dynamic influence is investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
