Abstract
The 0–3 lead-free piezoelectric ceramic-Portland cement composites were prepared by mixing and pressing the Portland cement (PC) and barium titanate (BT) ceramic powder. The influences of BT particle size and BT content on the electromechanical coupling coefficient (Kt) of the composites were investigated. The results indicate that the particle size of BT used to produce the composite under the conditions of the same BT content (at 50%BT) and fabrication technique has an influence on the Kt values. The electromechanical coupling coefficient was found to increase with the particle size of BT used where the values of Kt are found to be at 10.8% and 14.1% for composites with median particle size of 75μm and 425μm, respectively. Furthermore, Kt of composites increase with increasing content of BT (at the same particle size of 425μm) when the content of BT reaches 70%, Kt is 16.6%. In addition, the acoustic impedance of the composite also increase with an increase of BT content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
