Abstract
Recycled concrete aggregate (RCA), obtained by crushing of original (old) concrete, consists of natural aggregate grains and a cement mortar matrix. The presence of old adhered cement mortar, which has higher porosity than natural aggregate, causes unfavourable properties of RCA. The research conducted in order to improve the quality of RCA and to enable its greater application in the construction industry is presented in this paper. Therefore, RCA was subjected to quality improvement treatments with hydrochloric acid and carbon dioxide (accelerated carbonation). The first procedure was aimed at partially removing the adhered cement mortar and the second at reinforcing the cement matrix. The physical, mechanical and chemical properties of all three types of RCA were tested. After the pre-soaking acid treatment (0.1 mol/dm3 HCl), RCA showed reduced water absorption (up to 3%); the process of accelerated carbonation also led to reduced water absorption (13?20%) as well as to improved mechanical properties (?10%). A scanning electron microscopy investigation revealed that the carbonation process, as expected, significantly reduces porosity of RCA. The overall results show that if RCA is obtained by crushing of compact, high- -quality concrete, the procedures of aggregate quality improvement are not necessary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chemical Industry and Chemical Engineering Quarterly
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.