Abstract
The research results of influence of various abiotic factors on seed quality of maize hybrids during long storage are given. The most effective of them are: temperature regime, seed moisture content and oxygen access. The storage methods (dry and cold, and controlled atmosphere storage) that have the greatest impact on the seed quality were established. It was found that the optimal moisture content of seed depends on the storage duration, if for 1–2 years – 10–11 %, 3 years and more – 7–8 %. In order to stabilize the moisture content, it is recommended to store the seeds in airtight containers, limiting the humidity access from the outside. During the long-term seed storage, particularly for the breeding purposes, the temperature range should advisably maintain within 8–10 °C in seed storage place. With that the laboratory germination of seeds increased by 3–5 %, field germination – by 6–8 %, growth rate by number of sprouts– by 5–9 % and by the weight of sprouts – by 2–5 g compared to the 18–20 °C temperature in a typical storage. Methods of pre-sowing improvement of seed quality were established – it is separation and chemical treatment (seed dressing). Separation is the sifting of the seed mass through sieves with round holes in order to divide from the smallest fraction, the content of which was 15–23 % depending on the seed uniformity of maize hybrids. It was found that in order to assess objectively the effectiveness of different chemicals and establish their suitability for presowing seed treatment, it is necessary to determine laboratory germination, especially the growth rate by the number of sprouts and weight of 100 sprouts. Premature chemical treatment of seed should be avoided. Key words: maize hybrids, storage methods, abiotic factors, seed quality, presowing treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.