Including Kyoto in electrical engineering curriculum

Taking Stock of Strategies on Climate Change and the Way Forward: A Strategic Climate Change Framework for Australia

Executive Summary: The California Climate Action Registry, which was initially established in 2000 and began operation in Fall 2002, is a voluntary registry for recording annual greenhouse gas (GHG) emissions. The purpose of the Registry is to assist California businesses and organizations in their efforts to inventory and document emissions in order to establish a baseline and to document early actions to increase energy efficiency and decrease GHG emissions. The State of California has committed to use its ''best efforts'' to ensure that entities that establish GHG emissions baselines and register their emissions will receive ''appropriate consideration under any future international, federal, or state regulatory scheme relating to greenhouse gas emissions.'' Reporting of GHG emissions involves documentation of both ''direct'' emissions from sources that are under the entity's control and indirect emissions controlled by others. Electricity generated by an off-site power source is consider ed to be an indirect GHG emission and is required to be included in the entity's report. Registry participants include businesses, non-profit organizations, municipalities, state agencies, and other entities. Participants are required to register the GHG emissions of all operations in California, and are encouraged to report nationwide. For the first three years of participation, the Registry only requires the reporting of carbon dioxide (CO2) emissions, although participants are encouraged to report the remaining five Kyoto Protocol GHGs (CH4, N2O, HFCs, PFCs, and SF6). After three years, reporting of all six Kyoto GHG emissions is required. The enabling legislation for the Registry (SB 527) requires total GHG emissions to be registered and requires reporting of ''industry-specific metrics'' once such metrics have been adopted by the Registry. The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) was asked to provide technical assistance to the California Energy Commission (Energy Commission) related to the Registry in three areas: (1) assessing the availability and usefulness of industry-specific metrics, (2) evaluating various methods for establishing baselines for calculating GHG emissions reductions related to specific actions taken by Registry participants, and (3) establishing methods for calculating electricity CO2 emission factors. The third area of research was completed in 2002 and is documented in Estimating Carbon Dioxide Emissions Factors for the California Electric Power Sector (Marnay et al., 2002). This report documents our findings related to the first areas of research. For the first area of research, the overall objective was to evaluate the metrics, such as emissions per economic unit or emissions per unit of production that can be used to report GHG emissions trends for potential Registry participants. This research began with an effort to identify methodologies, benchmarking programs, inventories, protocols, and registries that u se industry-specific metrics to track trends in energy use or GHG emissions in order to determine what types of metrics have already been developed. The next step in developing industry-specific metrics was to assess the availability of data needed to determine metric development priorities. Berkeley Lab also determined the relative importance of different potential Registry participant categories in order to asses s the availability of sectoral or industry-specific metrics and then identified industry-specific metrics in use around the world. While a plethora of metrics was identified, no one metric that adequately tracks trends in GHG emissions while maintaining confidentiality of data was identified. As a result of this review, Berkeley Lab recommends the development of a GHG intensity index as a new metric for reporting and tracking GHG emissions trends.Such an index could provide an industry-specific metric for reporting and tracking GHG emissions trends to accurately reflect year to year changes while protecting proprietary data. This GHG intensity index changes while protecting proprietary data. This GHG intensity index would provide Registry participants with a means for demonstrating improvements in their energy and GHG emissions per unit of production without divulging specific values. For the second research area, Berkeley Lab evaluated various methods used to calculate baselines for documentation of energy consumption or GHG emissions reductions, noting those that use industry-specific metrics. Accounting for actions to reduce GHGs can be done on a project-by-project basis or on an entity basis. Establishing project-related baselines for mitigation efforts has been widely discussed in the context of two of the so-called ''flexible mechanisms'' of the Kyoto Protocol to the United Nations Framework Convention on Climate Change (Kyoto Protocol) Joint Implementation (JI) and the Clean Development Mechanism (CDM).

Energy-related activities are a major contributor of greenhouse gas (GHG) emissions. A growing body of knowledge clearly depicts the links between human activities and climate change. Over the last century the burning of fossil fuels such as coal and oil and other human activities has released carbon dioxide (CO2) emissions and other heat-trapping GHG emissions into the atmosphere and thus increased the concentration of atmospheric CO2 emissions. The main human activities that emit CO2 emissions are (1) the combustion of fossil fuels to generate electricity, accounting for about 37% of total U.S. CO2 emissions and 31% of total U.S. GHG emissions in 2013, (2) the combustion of fossil fuels such as gasoline and diesel to transport people and goods, accounting for about 31% of total U.S. CO2 emissions and 26% of total U.S. GHG emissions in 2013, and (3) industrial processes such as the production and consumption of minerals and chemicals, accounting for about 15% of total U.S. CO2 emissions and 12% of total ...

As traditional petroleum supplies dwindled and prices soared over the past few years, oil companies have shifted their attention to oil sands, a mix of sand, water, and a heavy, viscous hydrocarbon called bitumen that can be converted to oil. With the plunge in oil prices in fall 2008, many producers began canceling or postponing plans to expand oil sands development projects, but this turn of events could yet reverse, as Canada’s vast oil sands deposits are lauded as a secure source of imported oil for the United States. At the same time, however, oil sands present troubling questions in terms of the environmental health effects associated with their development.

38119MetricsTotal Downloads381Last 6 Months33Last 12 Months89Total Citations19Last 6 Months0Last 12 Months0View all metrics

Major US electric utility climate pledges have the potential to collectively reduce power sector emissions by one-third

Greenhouse gas (GHG) emissions is one of the major environmental concerns of shale gas development. To better understand this specific environmental impact, this chapter develops a hybrid life cycle inventory (LCI) model to estimate the energy use and greenhouse gas (GHG) emissions of China’s shale gas development. Results suggest a total average energy use per well of 123 TJ (range: 74–165 TJ) and total average GHG emissions per well of 9505 tCO2e (range: 5346–13551 tCO2e). Most of the energy use and GHG emissions are indirect impacts embodied in fuels and materials. Energy use and GHG emissions from the drilling stage comprise the largest share in both totals due to large amounts of diesel used as fuel in the well drilling process and the materials used in the well casing process. Furthermore, the comparison shows that the energy use and GHG emissions of shale gas development in China will be much higher than the U.S.KeywordsShale gas developmentLife-cycle analysisGHG emissionsEnergy useEmbodied energy

Energy use and greenhouse gas emissions in organic and conventional farming systems in the Netherlands

Oil consumption and import of China increase very quickly in recent years. Because of vehicle population growing in a tremendous speed, nearly 40% of oil has already used in transportation sector in today's China. Many kinds of alternative fuel vehicles are introduced, demonstrated and used in cities to reduce the traditional gasoline and diesel not only to reduce the regulated emissions, but also to improve the oil security of China. When the Kyoto Protocol became effective in last year, Chinese government and experts began to focus on greenhouse gas (GHG) emissions of alternative vehicle fuels. In order to comprehensively evaluating energy and global warming impact lead by production and utilization of alternative vehicle fuels in China, Well-to-Wheel analysis is used in this paper to quantitatively calculate energy use and GHG emissions of recovery, production, transportation and distribution, and end-use of compressed natural gas (CNG), liquefied petroleum gas (LPG), ethanol, methanol, dimethyl ether (DME) and Fischer-Tropsch diesel (FTD). The feedstock of ethanol includes corn and wheat. The energy use and GHG emissions of alternative vehicle fuels are compared with traditional gasoline and diesel. The results show that CNG and LPG is good choice from energy saving and GHG reduction in China. NG-based and coal-based methanol, DME and F-T diesel have lower lifecycle petroleum consumption than traditional gasoline and diesel, so that they may be an answer to Chinese oil security. The lifecycle total energy use, fossil energy use and GHG emissions of NG-based synthesized fuels are lower than coal-based fuels, but obviously higher than traditional gasoline and diesel, so that utilization of them will lead to potential pressure to China GHG reduction responsibility. The GHG emissions performance of China ethanol fuel is not as good as U.S. ethanol. The main reason is abuse of agriculture chemical in corn farming, especial the nitrogenous fertilizer, which is caused great N20 emission

As part of the Net Zero Carbon Water Cycle Program (NZCWCP) for Victoria state in Australia, we have sought to understand the potential to reduce household energy consumption and related Greenhouse Gas (GHG) emissions by influencing water use. Digital metering data disaggregated into 57 million discrete water usage events across 105 households at a resolution of 10 millilitres at 10 second intervals from June 2017 to March 2020, from a previous Yarra Valley Water (Melbourne, Australia) study, was analysed, together with the dynamic relationship between the multiple energy sources (natural gas, grid electricity, solar) used to heat water for showers in each hour of the day. Water-related energy (WRE) use, including water desalination and treatment, pumping, heating, wastewater collection and treatment, comprised 12.6% of Australia’s primary energy use in 2019. Water heating (by natural gas and electricity) comprised the largest component of WRE use for across residential, commercial, and industrial sectors. Furthermore, 69% of Victoria’s total water usage was by residential customers in 2020-2021. WRE GHG emissions were around 3.8% of Victoria’s total GHG emissions in 2018. Showers (~50% of residential WRE), system losses (~27% of residential WRE), and clothes washers (~9% of residential WRE) are the three largest components of WRE consumption. The main objective of this work is the creation of industry-accessible tools to improve knowledge and management options from the understanding of reductions in cost and GHG emissions from household showering WRE use. Potential options considered, to reduce water and energy use, as well as associated GHG emissions and customer utility bills, include (a) behaviour management such as water and energy pricing to change time of use behaviours, and (b) the adoption of efficient shower head improvements. Shower WRE and GHG emissions were found able to be strongly impacted by small changes in daily routines. GHG emissions reduction from showering could be reduced up to 20 (in summer) - 22% (in winter) by shifting demand time of showering or replacing residential showerheads. Extrapolated to state and Australian scales, reductions in water usage could be up to 14 GL (Victoria) and 144 GL (Australia), and reductions in GHG emissions 1,600 ktCO2eq (Victoria) and 17,300 ktCO2eq (Australia). It provides fundamental new information which could inform a suite of new management options to impact water-related energy from showers, and related GHG emissions and customer water and energy cost.

Since the adoption of Bali Roadmap in 2007, the efforts to reduce Green House Gases (GHGs) Emissions are growing with concern of new agreement against climate change. Under Kyoto Protocol, Annex I parties which have received mandatory target of GHG emissions implement lots of policies for reducing GHG emissions. Beside Annex I parties, many countries set their own GHG emissions target and make efforts to achieve the target in many ways. Each country introduces voluntary agreements and negotiated agreements to reduce GHG emissions in industrial sector that occupies a large part of national GHG emissions. As the demand on reduction of GHG emission is strengthening, climate change policies come up in form of negotiated agreements. The existence of the obligation affects countries’ GHG reduction policies’ intensity. According to recent discussion about post-Kyoto protocol, it is expected that some countries as China, South Korea, and India would receive the mandatory target of GHG emission.

BackgroundPolicies to mitigate climate change by reducing greenhouse gas (GHG) emissions can yield public health benefits by also reducing emissions of hazardous co-pollutants, such as air toxics and particulate matter. Socioeconomically disadvantaged communities are typically disproportionately exposed to air pollutants, and therefore climate policy could also potentially reduce these environmental inequities. We sought to explore potential social disparities in GHG and co-pollutant emissions under an existing carbon trading program—the dominant approach to GHG regulation in the US and globally.Methods and findingsWe examined the relationship between multiple measures of neighborhood disadvantage and the location of GHG and co-pollutant emissions from facilities regulated under California’s cap-and-trade program—the world’s fourth largest operational carbon trading program. We examined temporal patterns in annual average emissions of GHGs, particulate matter (PM2.5), nitrogen oxides, sulfur oxides, volatile organic compounds, and air toxics before (January 1, 2011–December 31, 2012) and after (January 1, 2013–December 31, 2015) the initiation of carbon trading. We found that facilities regulated under California’s cap-and-trade program are disproportionately located in economically disadvantaged neighborhoods with higher proportions of residents of color, and that the quantities of co-pollutant emissions from these facilities were correlated with GHG emissions through time. Moreover, the majority (52%) of regulated facilities reported higher annual average local (in-state) GHG emissions since the initiation of trading. Neighborhoods that experienced increases in annual average GHG and co-pollutant emissions from regulated facilities nearby after trading began had higher proportions of people of color and poor, less educated, and linguistically isolated residents, compared to neighborhoods that experienced decreases in GHGs. These study results reflect preliminary emissions and social equity patterns of the first 3 years of California’s cap-and-trade program for which data are available. Due to data limitations, this analysis did not assess the emissions and equity implications of GHG reductions from transportation-related emission sources. Future emission patterns may shift, due to changes in industrial production decisions and policy initiatives that further incentivize local GHG and co-pollutant reductions in disadvantaged communities.ConclusionsTo our knowledge, this is the first study to examine social disparities in GHG and co-pollutant emissions under an existing carbon trading program. Our results indicate that, thus far, California’s cap-and-trade program has not yielded improvements in environmental equity with respect to health-damaging co-pollutant emissions. This could change, however, as the cap on GHG emissions is gradually lowered in the future. The incorporation of additional policy and regulatory elements that incentivize more local emission reductions in disadvantaged communities could enhance the local air quality and environmental equity benefits of California’s climate change mitigation efforts.

Researchers at Argonne National Laboratory expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model and incorporated the fuel economy and electricity use of alternative fuel/vehicle systems simulated by the Powertrain System Analysis Toolkit (PSAT) to conduct a well-to-wheels (WTW) analysis of energy use and greenhouse gas (GHG) emissions of plug-in hybrid electric vehicles (PHEVs). The WTW results were separately calculated for the blended charge-depleting (CD) and charge-sustaining (CS) modes of PHEV operation and then combined by using a weighting factor that represented the CD vehicle-miles-traveled (VMT) share. As indicated by PSAT simulations of the CD operation, grid electricity accounted for a share of the vehicle's total energy use, ranging from 6% for a PHEV 10 to 24% for a PHEV 40, based on CD VMT shares of 23% and 63%, respectively. In addition to the PHEV's fuel economy and type of on-board fuel, the marginal electricity generation mix used to charge the vehicle impacted the WTW results, especially GHG emissions. Three North American Electric Reliability Corporation regions (4, 6, and 13) were selected for this analysis, because they encompassed large metropolitan areas (Illinois, New York, and California, respectively) and provided a significant variation of marginal generation mixes. The WTW results were also reported for the U.S. generation mix and renewable electricity to examine cases of average and clean mixes, respectively. For an all-electric range (AER) between 10 mi and 40 mi, PHEVs that employed petroleum fuels (gasoline and diesel), a blend of 85% ethanol and 15% gasoline (E85), and hydrogen were shown to offer a 40-60%, 70-90%, and more than 90% reduction in petroleum energy use and a 30-60%, 40-80%, and 10-100% reduction in GHG emissions, respectively, relative to an internal combustion engine vehicle that used gasoline. The spread of WTW GHG emissions among the different fuel production technologies and grid generation mixes was wider than the spread of petroleum energy use, mainly due to the diverse fuel production technologies and feedstock sources for the fuels considered in this analysis. The PHEVs offered reductions in petroleum energy use as compared with regular hybrid electric vehicles (HEVs). More petroleum energy savings were realized as the AER increased, except when the marginal grid mix was dominated by oil-fired power generation. Similarly, more GHG emissions reductions were realized at higher AERs, except when the marginal grid generation mix was dominated by oil or coal. Electricity from renewable sources realized the largest reductions in petroleum energy use and GHG emissions for all PHEVs as the AER increased. The PHEVs that employ biomass-based fuels (e.g., biomass-E85 and -hydrogen) may not realize GHG emissions benefits over regular HEVs if the marginal generation mix is dominated by fossil sources. Uncertainties are associated with the adopted PHEV fuel consumption and marginal generation mix simulation results, which impact the WTW results and require further research. More disaggregate marginal generation data within control areas (where the actual dispatching occurs) and an improved dispatch modeling are needed to accurately assess the impact of PHEV electrification. The market penetration of the PHEVs, their total electric load, and their role as complements rather than replacements of regular HEVs are also uncertain. The effects of the number of daily charges, the time of charging, and the charging capacity have not been evaluated in this study. A more robust analysis of the VMT share of the CD operation is also needed.

Researchers at Argonne National Laboratory expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model and incorporated the fuel economy and electricity use of alternative fuel/vehicle systems simulated by the Powertrain System Analysis Toolkit (PSAT) to conduct a well-to-wheels (WTW) analysis of energy use and greenhouse gas (GHG) emissions of plug-in hybrid electric vehicles (PHEVs). The WTW results were separately calculated for the blended charge-depleting (CD) and charge-sustaining (CS) modes of PHEV operation and then combined by using a weighting factor that represented the CD vehicle-miles-traveled (VMT) share. As indicated by PSAT simulations of the CD operation, grid electricity accounted for a share of the vehicle's total energy use, ranging from 6% for a PHEV 10 to 24% for a PHEV 40, based on CD VMT shares of 23% and 63%, respectively. In addition to the PHEV's fuel economy and type of on-board fuel, the marginal electricity generation mix used to charge the vehicle impacted the WTW results, especially GHG emissions. Three North American Electric Reliability Corporation regions (4, 6, and 13) were selected for this analysis, because they encompassed large metropolitan areas (Illinois, New York, and California, respectively) and provided a significant variation of marginal generation mixes. The WTW results were also reported for the U.S. generation mix and renewable electricity to examine cases of average and clean mixes, respectively. For an all-electric range (AER) between 10 mi and 40 mi, PHEVs that employed petroleum fuels (gasoline and diesel), a blend of 85% ethanol and 15% gasoline (E85), and hydrogen were shown to offer a 40-60%, 70-90%, and more than 90% reduction in petroleum energy use and a 30-60%, 40-80%, and 10-100% reduction in GHG emissions, respectively, relative to an internal combustion engine vehicle that used gasoline. The spread of WTW GHG emissions among the different fuel production technologies and grid generation mixes was wider than the spread of petroleum energy use, mainly due to the diverse fuel production technologies and feedstock sources for the fuels considered in this analysis. The PHEVs offered reductions in petroleum energy use as compared with regular hybrid electric vehicles (HEVs). More petroleum energy savings were realized as the AER increased, except when the marginal grid mix was dominated by oil-fired power generation. Similarly, more GHG emissions reductions were realized at higher AERs, except when the marginal grid generation mix was dominated by oil or coal. Electricity from renewable sources realized the largest reductions in petroleum energy use and GHG emissions for all PHEVs as the AER increased. The PHEVs that employ biomass-based fuels (e.g., biomass-E85 and -hydrogen) may not realize GHG emissions benefits over regular HEVs if the marginal generation mix is dominated by fossil sources. Uncertainties are associated with the adopted PHEV fuel consumption and marginal generation mix simulation results, which impact the WTW results and require further research. More disaggregate marginal generation data within control areas (where the actual dispatching occurs) and an improved dispatch modeling are needed to accurately assess the impact of PHEV electrification. The market penetration of the PHEVs, their total electric load, and their role as complements rather than replacements of regular HEVs are also uncertain. The effects of the number of daily charges, the time of charging, and the charging capacity have not been evaluated in this study. A more robust analysis of the VMT share of the CD operation is also needed.

Options to reduce greenhouse gas emissions during wastewater treatment for agricultural use