Abstract
Rapidly solidified zirconia toughened alumina (ZTA) eutectic bioceramics are promising load-bearing materials that meet the needs for durability and aging resistance for biomedical applications. However, one of the major problems is their poor bioactivity which may lead to aseptic loosening after long-term service. To solve this problem, calcium phosphate (Ca-P) coatings are in-situ synthesized on rapidly solidified ZTA eutectic bioceramics by laser cladding technology with mixed powders of CaHPO4∙ 2H2O and CaCO3 after granulation as precursors. X-ray diffraction results show that Ca-P coatings are mainly composed of Ca0.2Zr0.8O1.8, AlPO4, Ca4P2O9, Ca3(PO4)2 and Ca2P2O7. The amount of calcium phosphates reaches a maximum when using a laser power of 800 W and a scanning rate of 650 mm/min. Cross-sectional morphologies and energy dispersive spectrometer analysis indicate excellent interfacial bonding between the substrate and coating. In vitro tests prove that Ca-P cladded samples can induce apatite with flake-like morphology similar to those on the bioceramic coatings cladded on titatinum alloy precipitation and promote MC3T3-E1 cell proliferation. This work reveals that laser cladding has the potential to improve the biomineralization of solidified ZTA eutectic bioceramics enabling prolonged clinical service life.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
