In Situ Samplings and Remote Sensing Measurements to Characterize Aerosol Properties over Southeast Italy

Abstract

Abstract Ground-based particulate matter (PM) samplers, an XeF Raman lidar operating in the framework of the European Aerosol Research Lidar Network (EARLINET), and a sun/sky radiometer operating in the framework of the Aerosol Robotic Network (AERONET) have been used to characterize vertical profiles, optical and microphysical properties, and chemical composition of aerosols during the 29 June–1 July 2005 dust outbreak that occurred over the central-eastern Mediterranean. Aerosol backscatter coefficient, total depolarization, and lidar ratio vertical profiles revealed that a well-mixed dust layer extending from ∼0.5 to 6 km was present over southeastern Italy on 30 June. Sun/sky radiometer measurements revealed a bimodal lognormal size distribution during all measurement days. The particle volume distribution was found to be well correlated either to the PM mass distribution measured at ground by a seven-stage cascade impactor and to the fine to total suspended PM mass ratio measured by ground-based PM samplers. Scanning electron microscopy and ion chromatography analyses on PM samples revealed that coarse-mode aerosols were mainly made of carbonate, aluminum-silicate, and sea salt particles. Carbon, sulfate, and nitrate particles were the main components of fine-mode aerosols representing more than 50% of the total aerosol load; the significant role of fine-mode anthropogenic particles during a dust event is highlighted. Finally, the potential capabilities of complementary measurements by passive and active remote sensing techniques and in situ observations to retrieve the vertical distribution of the particle number and mass concentration are analyzed and discussed.