In Situ Construction of CdS/g-C3N4 Heterojunctions in Spent Thiolation@Wood-Aerogel for Efficient Excitation Peroxymonosulfate to Degradation Tetracycline.

Abstract

Pollutant treatment, hazardous solid waste conversion, and biomass resource utilization are significant topics in environmental pollution control, and simultaneously achieving them is challenging. Herein, we developed a "from waste absorbent to effective photocatalyst" upcycle strategy for nontoxic conversion of Cd(II) adsorbed on thiolation@wood-aerogel (TWA) into CdS/g-C3N4 heterojunctions through the in situ chemical deposition high-temperature carbonization combined conversion method to overcome the above problems simultaneously. We used Schiff base reaction to graft l-cysteine into dialdehyde@wood-aerogel to prepare TWA with a high Cd(II) adsorption capacity (600 mg/L, 294.66 mg/g). Subsequently, the spent Cd(II)-loaded-TWA was used as a substrate for in situ construction of Cd(II) into CdS/g-C3N4 heterojunction for activating peroxymonosulfate (PMS) under simulated sunlight [simulated solar light (SSL)], achieving efficient tetracycline (TC) degradation (20 mg/L, 95.32%). The Langmuir and pseudo-second-order models indicate single-layer chemical adsorption of Cd(II) on the TWA adsorption process. In the PMS/SSL system, CdS/g-C3N4@TWA efficiently and rapidly degraded TC via an adsorption-photocatalytic synergistic degradation mechanism. The used CdS/g-C3N4@TWA has a good biocompatibility. This study proposed design and preparation of a new type of wood aerogel absorbent and provided a novel upcycling strategy for innovative use of the spent waste adsorbent.