Abstract
The typical sol-gel method was adopted to synthesize the pristine Li1.20[Mn0.54Ni0.13Co0.13]O2 and Li1.20[Mn0.54-xNi0.13Co0.13Nbx]O1.95F0.05 (x = 0, 0.01, 0.02, 0.03). And the effects of Nb5+ and F− substitution on the lattice structures, particles morphologies and electrochemical properties were comprehensively studied by using the X-ray Diffractometer (XRD), Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and galvanostatic charge-discharge tests. The results demonstrated that the Nb5+ and F− doping modification could increase the lattice parameter of a and c, and would not obviously change the morphologies of cathode particles. Besides, the electrochemical properties of Li1.20[Mn0.54Ni0.13Co0.13]O2 were significantly improved after the Nb5+ and F− doping. Among all samples, the Li1.20[Mn0.52Ni0.13Co0.13Nb0.02]O1.95F0.05 delivered the highest discharge capacity of 117.1 mAh g−1 at 5C high rate and the most stable capacity retention of 92.5% at 0.5C rate after 200 cycles. The Electronic Impedance Spectroscopy (EIS) analysis reflected that the Nb5+ and F− doping could relieve the increase of charge transfer resistance and the ohmic resistance of interaction between electrolyte and cathode during cycling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.