Abstract
Ultrasonic deep rolling(UDR) technique is applied to treating electric arc spray 3Cr13 coating to improve its overall properties.The influence of UDR treatment on coating porosity,surface roughness,residual stresses,microhardness,inherent strength and tribological property of the coating is investigated by using scanning electron microscope,X-Ray stress instrument,ball-on-disc friction and wear tester,etc.Results of the tests show the distinct improvement on the overall properties of the UDR treated coating:The porosity decreases from 5.1% to 2.3%,surface roughness decreases from more than 40 μm to 2.4 μm,surface compressive residual stresses increases from 8 MPa to 257 MPa,microhardness increases about 45% and wear resistance increases obviously.The X-ray diffraction experimental results show that the peak of Bragg diffraction pattern is broadened evidently and the intensity of the peak also increases evidently as a result of UDR treatment,which indicates the refinement of coating grain and the distortion of lattice,and the formation of a sheet texture surface with parallel lattice orientation.At the same time,the effect mechanism of UDR treatment on the properties of the coating is discussed and analyzed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
