Impact of pH and Temperature on Foodborne Pathogens’ Survival in Cold Brew Coffee

Study on ultrasound-assisted extraction of cold brew coffee using physicochemical, flavor, and sensory evaluation

The impact of the roasting degree on ultra-high-pressure cold brew (UHP) coffee remains unclear, although it has been found that UHP technology accelerates the extraction of cold brew (CB) coffee. Therefore, this study investigated the effects of three different degrees of roasting (light, medium, and dark) on the physicochemical characteristics, volatile and non-volatile components, and sensory evaluation of UHP coffee. Orthogonal partial least-squares-discriminant analysis (OPLS-DA) and principal component analysis (PCA) were used to assess the effects of different roasting degrees. The results showed that most physicochemical characteristics, including total dissolved solids (TDSs), extraction yield (EY), total titratable acidity (TTA), total sugars (TSs), and total phenolic content (TPC), of UHP coffee were similar to those of conventional CB coffee regardless of the degree of roasting. However, the majority of physicochemical characteristics, non-volatile components, including the antioxidant capacity (measured based on DPPH and ABTS) and melanoidin, caffeine, trigonelline, and CGA contents increased significantly with an increase in roasting degree. The sensory evaluation revealed that as the roasting degree rose, the nutty flavor, astringency, bitterness, body, and aftertaste intensities increased, while floral, fruity, and sourness attributes decreased. The HS-SPME-GC/MS analysis showed that most volatile components increased from light to dark roasting. Moreover, 15 representative differential compounds, including hazelnut pyrazine, linalool, butane-2,3-dione, and 3-methylbutanal, were identified by calculating the odor-active values (OAVs), indicating that these contributed significantly to the odor. The PCA showed that the distance between the three roasting degree samples in UHP coffee was smaller than that in CB coffee. Overall, the effect of roasting degrees on UHP coffee was less than that on CB coffee, which was consistent with the results of physicochemical characteristics, volatile components, and sensory evaluation.

Coffee brewing is a complex process from roasted coffee bean to beverage, playing an important role in coffee flavor quality. In this study, the effects of hot and cold brewing on the flavor profile of coffee were comprehensively investigated on the basis of chromatographic and sensory approaches. By applying gas chromatography–mass spectrometry and odor activity value calculation, most pyrazines showed higher contribution to the aroma profile of cold brew coffee over hot brew coffee. Using liquid chromatography, 18 differential non-volatiles were identified, most of which possessed lower levels in cold brew coffee than hot brew coffee. The sensory evaluation found higher fruitiness and lower bitterness and astringent notes in cold brew coffee than hot brew coffee, which was attributed by linalool, furfural acetate, and quercetin-3-O-(6″-O-p-coumaroyl) galactoside. This work suggested coffee brewing significantly affected its flavor profile and sensory properties.

This study investigated the non-volatile and volatile compounds in samples of cold brew (CB) coffee, coffee from a coffee shop (CS), ready-to-drink (RTD) coffee, and brewed coffee from a coffee maker (CM). The volatile compounds were identified using headspace solid-phase microextraction with gas chromatography-mass spectrometry, and the samples were treated with high-performance liquid chromatography for the quantification of caffeine, chlorogenic acid, and trigonelline. The results indicate that RTD coffee had the lowest amounts of non-volatile compounds. A total of 36 volatile compounds were semi-quantified; the contents of most volatile compounds in CS and Folgers samples were higher than those in CB and CM samples. The contents of 25 volatile compounds in the CM sample were higher than those in the CB sample. The consumer and instrumental data show that the bitterness intensity was correlated with pyrazines, pyrroles, and guaiacols, whereas the coffeeID intensity was correlated with phenols. Semi-quantification and principal component analysis results show that the extraction method and temperature could influence the volatile compound profiles.

Cold brew coffee (CBC) has gained in popularity due to its distinct sensory experience. However, CBC can pose a risk for bacterial pathogens if not stored properly. High-Pressure Processing (HPP) is a nonthermal technology that can improve the safety of CBC while maintaining its quality. In this study, CBC made from ground roasted coffee grains was processed at 600 MPa for 3 min and stored at 4 or 23 °C for 90 days. The microbiological quality indicators remained stable throughout the study period. Physicochemical and quality parameters, such as pH, total dissolved solids, titratable acidity, color, total phenolic compounds and antioxidant activity, were not significantly affected by HPP. Both unprocessed and HPP CBC samples showed changes in pH, titratable acidity and color stability after 60 days at 23 °C. Unprocessed CBC samples spiked with Escherichia coli O157:H7, Listeria monocytogenes and Salmonella enterica showed decreased counts, but the pathogens were still detectable after 60 days at 4 °C and after 90 days at 23 °C. HPP achieved a >6-log10 reduction in the species tested, with non-detectable levels for at least 90 days at both storage temperatures. These findings suggest that HPP can effectively control vegetative pathogens and spoilage microorganisms in CBC while preserving its quality attributes.

Roasting is an important process in the formation of coffee flavor characteristics, which determines the quality of coffee and consumer acceptance. However, the influence of roasting degree on the flavor characteristics of cold brew coffee has not been fully described. In the present study, the flavor characteristics of cold brew coffee with different roasting degrees were compared in detail by using chromatographic and electronic sensory approaches, and the flavor changes induced by freeze-drying were investigated. Pyrazine and heterocyclic compounds were the main aroma compounds in coffee, and gradually dominated with the increase of roasting. Pyridine was consistently present in cold brew coffees of different roasting degrees and showed significant gradient of quantity accumulation. Aroma compounds such as pyrazine, linalool and furfuryl acetate were the main contributors to coffee roasting, floral and fruity flavor. Freeze-drying preserved the fruity and floral aromas of medium-roasted cold brew coffee, whereas reducing the bitterness, astringency and acidity properties that are off-putting to consumers. The higher consumer acceptance and enjoyment in medium roast cold brew coffee may be related to its stronger floral and fruity aroma. The aroma profile qualities of freeze-drying processed medium roasted cold brewed coffee were more dominant and more suitable for freeze-drying processing than medium dark roasting. Application of freeze-drying for cold brew coffee will promote the convenience of drinking. The present study provides valuable technical guidance in improving the flavor and quality of cold brew coffee, and also promotes its commercialization process. © 2024 Society of Chemical Industry.

The cold brew coffee (CBC) trend is increasing globally; nevertheless, there is limited literature on this popular beverage. Many studies have focused on the health benefits of green coffee beans and coffee brewed by conventional hot water methods. Thus, whether cold brew conveys similar benefits is still unclear. This study aimed to investigate the influences of brewing conditions on physicochemical properties using response surface methodology in order to optimize the brewing parameters and compare the resulting CBC with the coffee from the French Press method. Central Composite Design was used to evaluate the effects and optimize the brewing parameters (i.e., water temperature, coffee-to-water ratio (C2WR), coffee mesh size, and extraction time) on total dissolved solids (TDS). Physicochemical properties, antioxidant activity, volatile compounds, and organic acids were compared between CBC and its French Press counterpart. Our results showed that water temperature, C2WR, and coffee mesh size significantly influenced the TDS of CBC. The optimized brewing conditions were water temperature (4 °C), C2WR (1:14), coffee mesh size (0.71 mm), and 24-h extraction time. At similar TDS, caffeine content, volatile compounds, and organic acids were higher in CBC, while other properties showed no significant difference. In conclusion, this study showed that at similar TDS, CBC has characteristics generally similar to hot brew coffee, except for the caffeine and sensory-related compound content. The model for the prediction of TDS from this study may benefit food services or industries for the optimization of brewing conditions to obtain different characteristics of CBC.

Synergistic effect of naringenin and mild heat for inactivation of E. coli O157:H7, S. Typhimurium, L. monocytogenes, and S. aureus in peptone water and cold brew coffee.

Cold brew coffee is a brewing method that is increasing in prevalence. While it has been anecdotally suggested that this method may provide a more aromatic and flavourful coffee product, there is little research published that looks at the concentration of caffeine or other coffee substituents in cold brew coffee. The potential alteration in chemical composition in cold brew provides a few interesting avenues for research. Can caffeine in cold brew be quantified by conventional methods? If so, how does the caffeine profile of cold brews relate to hot brew methods? Here we report the caffeine content and variability in small batch cold brew coffee and show that HPLC/UV-Vis, a standard method for quantitation of caffeine in other extraction methods, is useful for detection of caffeine in cold brew coffee. The mean concentration of caffeine in an average 355 mL serving was found to be 207.22 ± 39.17 mg over five distinct batches of cold brew coffee concentrate. Cold brew preparation methods produce similar quantities of caffeine as hot brew preparation, yet may have increased storage capabilities including improved retention of flavonoids and other secondary metabolites. Therefore, cold brew may provide utility in clinical trials examining caffeine and the effect of other components of coffee as it is commonly consumed.

Although cold brew coffee is becoming increasingly popular among consumers, the long coffee extraction time is not conducive to the further development of the market. This study explored the feasibility of ultrahigh pressure (UHP) to shorten the time required for preparing cold brew coffee. The effects of pressure and holding time on the physicochemical characteristics and sensory evaluation of UHP-assisted cold brew coffee were also determined. The extraction yield; total dissolved solid, total phenol, and melanoid content; antioxidant capacity; and trigonelline and chlorogenic acid contents of UHP-assisted cold brew coffee increased as the pressure increased. The extraction yield and the total dissolved solid, total phenol, total sugar, and chlorogenic acid and trigonelline contents were higher when the holding time was longer. The HS-SPME-GC/MS analysis demonstrated that the furan, aldehyde, and pyrazine contents in coffee increased as the pressure and holding time increased. The pressure did not significantly impact the concentrations of volatile components of esters and ketones in coffee samples. However, the increase in holding time significantly increased the ester and ketone contents. The sensory evaluation results revealed that as pressure rose, the intensities of nutty, fruity, floral, caramel, and sourness flavors increased, whereas bitterness and sweetness decreased. Longer holding time increased nutty, caramel, sour, bitter, sweet, and aftertaste flavors. Principal component analysis (PCA) results indicated that holding time is a more crucial factor affecting the physiochemical indices and flavor characteristics of coffee. UHP can shorten the preparation time of cold brew coffee. Pressure and holding time significantly affected the physiochemical indices and volatile components of UHP-assisted cold brew coffee. UHP-assisted cold brew coffee had lower bitterness, higher sweetness, and a softer taste than conventional cold brew coffee.

Cold brew coffee has gained significant popularity in the global market. This study examined the differences in chemical properties and flavor of cold brew coffee during storage, which was subjected to low-temperature pasteurization using induced electric field (IEF) at temperatures of 52 °C and 58 °C for 92 s, corresponding to 18.52 V/cm and 25.92 V/cm. Then, a high-temperature short-time (HTST) pasteurization was performed at 93 °C for 2 min as the control. Microbial analysis demonstrated that IEF treatment at 58 °C achieved a bactericidal effect. Both the IEF and HTST groups exhibited consistent trends in total sugar and total phenol content, showing approximately 28 μg GAE/mL after 28 days for IEF-2 group, compared to 25 μg/mL for HTST. Flavor analysis indicated that IEF group preserved the aroma characteristics during storage period. Further, IEF treatment effectively retained the key aroma compounds in cold brew coffee through GC–MS analysis, particularly pyrazine compounds with a relative content increased by 0.96 % in IEF-2 group after 28 days. Moreover, the bioactive compounds initially increased and subsequently decreased over the storage.

The extraction kinetics and equilibrium concentrations of caffeine and 3-chlorogenic acid (3-CGA) in cold brew coffee were investigated by brewing four coffee samples (dark roast/medium grind, dark roast/coarse grind, medium roast/medium grind, medium roast/coarse grind) using cold and hot methods. 3-CGA and caffeine were found at higher concentrations in cold brew coffee made with medium roast coffees, rather than dark roast. The grind size did not impact 3-CGA and caffeine concentrations of cold brew samples significantly, indicating that the rate determining step in extraction for these compounds did not depend on surface area. Caffeine concentrations in cold brew coarse grind samples were substantially higher than their hot brew counterparts. 3-CGA concentrations and pH were comparable between cold and hot brews. This work suggests that the difference in acidity of cold brew coffee is likely not due to 3-CGA or caffeine concentrations considering that most acids in coffee are highly soluble and extract quickly. It was determined that caffeine and 3-CGA concentrations reached equilibrium according to first order kinetics between 6 and 7 hours in all cold brew samples instead of 10 to 24 hours outlined in typical cold brew methods.

Revealing flavor improvement in whey-based cold brew coffee: characteristic flavor compounds and formation mechanisms.

The role of roasting in cold brew coffee chemistry is poorly understood. The brewing temperature influences extraction processes and may have varying effects across the roast spectrum. To understand the relationship between brew temperature and roast temperature, hot and cold brew coffees were prepared from Arabica Columbian coffee beans roasted to light, medium, and dark levels. Chemical and physical parameters were measured to investigate the relationships among degree of roast, water temperature, and key characteristics of resulting coffees. Cold brew coffees showed differential extraction marked by decreased acidity, lower concentration of browned compounds, and fewer TDS indicating that cold water brewing extracts some compounds less effectively than hot water brewing. Compounds in coffee did exhibit sensitivity to degree of roast, with darker roasts resulting in decreased concentrations for both hot and cold brew coffees. Total antioxidant capacity (TAC) was only sensitive to degree of roast in cold brew coffees, while hot brew coffees had a constant TAC for all three roast levels. This indicates that the solid bean matrix and its chemical constituents interact with cold water differently than with hot water. Surface wetting, pore dynamics, and solubility all contribute to the extraction potential during brewing and are all functions of water temperature.

This research used ultra-fast E-nose, E-tongue and SCA analysis to explore the effects of different sterilization methods (pasteurization, back pressure sterilization, high temperature short-term sterilization, membrane filtration treatment and high pressure processing) on cold brew coffee. The results showed that non-heat sterilization can better maintain the sensory quality of coffee liquid. Back pressure sterilization could reduce the pH value of coffee liquid to 4.65, and decrease the aroma content significantly by 50.5% (<i>p</i> &lt; 0.05), while the sourness and bitterness of coffee samples increased, which lowered the sensory quality of coffee. Among the heat sterilization treatments, high temperature short-term sterilization had relatively little effect on the sensory quality of the coffee beverage, and decreased the bitterness of the coffee. Taking sensory quality, nutrients and cost into consideration, it is suggested that high temperature short time sterilization is a prefered method. Thus, the results of this research provided a theoretical basis for the selection of sterilization method for cold brew coffee.