Abstract
In this paper, a finite element modelling procedure is implemented in order to predict the static load-indentation curves and the defection shape of simply supported circular GLARE fibre-metal laminates subjected to lateral indentation by a hemispherical indentor. ANSYS software is used and a non-linear analysis is employed with geometric and material non-linearities for FEM calculations. The finite element modelling procedure is applied to GLARE 2–2/1–0.3 and to GLARE 3–3/2–0.4 simply supported circular plates with various diameters. It is found that the simply supported circular GLARE plates deform axisymmetrically from the beginning of the indentation process up to the point of their first failure due to glass-epoxy tensile fracture. By comparison of the obtained load-indentation curves to corresponding previously published load-indentation curves of clamped circular GLARE plates, the effect of the different boundary conditions on their lateral indentation response is studied. Furthermore, the strain energy-indentation curves of the considered circular GLARE 2 and GLARE 3 plates with simply supported and clamped boundaries are calculated and compared. It is found that the simply supported GLARE plates have reduced stiffness and demonstrate an increased first failure defection due to glass-epoxy tensile fracture versus the clamped GLARE plates, whereas the first failure load is not significantly affected by the different boundary conditions. It is also found that for the same lateral indentation, simply supported GLARE plates absorb lower strain energy levels than clamped GLARE plates. Referring to a specific lateral indentation level, the influence of the different boundary support on the corresponding indentation load and the absorbed strain energy is strong and can reach a deviation level of 45 % between the two support types. To our knowledge, a research concerning the response of simply supported GLARE plates under lateral indentation has not been published elsewhere.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
