Abstract
AbstractSilicon-On-Insulator (SOI) and advanced device technologies require the ability to fabricate uniform thin films of silicon (< 50 nm) and silicon dioxide (< 5 nm). A technique for hyper-thinning silicon and silicon dioxide films to these dimensions is described. The method is based upon etching by a high flux beam of hyperthermal (2 to 14 eV translational energy) fluorine atoms generated using Physical Sciences’ FAST technology. The fluorine atom beam contains greater than 95% atoms and less than 0.1% ions. The low ion content of the beam allows damage-free processing of these films. At the available translational energies, the fluorine atom reaction probability with silicon is near unity. Hence, high rate etching can be achieved. Silicon films have been thinned at ambient temperature (20 C) to thicknesses less than 50 nm by this technique with etching rates up to 120 nm/min demonstrated. The hyperthinning is uniform and does not affect the surface finish. Analysis of the processed surface shows no evidence of contamination from the treatment. High rate etching of silicon dioxide films has also been shown. The reaction probability of hyperthermal fluorine atoms with SiO2 films is 0.25.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.