Hydrophilic Polysiloxane Microspheres and Ceramic SiOC Microspheres Derived from Them

Abstract

In this overview article, the research on polysiloxane microspheres performed in the authors’ laboratory is briefly reviewed. These microspheres are prepared in water emulsion from polyhydromethylsiloxane (PHMS). This polymer is cross-linked in the emulsion process by hydrosilylation using various low molecular weight cross-linkers having at least two vinyl functions. The microspheres contain a large number of silanol groups which give them hydrophilicity and a broad possibility of functionalization by condensation with reactive silanes bearing a functional group in the organic radical. Further transformation of these functions leads to materials for practical use, such as catalysts and biocidal powders. The hydrophilic-hydrophobic properties of the microspheres may be fine-tuned by silylation or modification of the precursor PHMS polymer. Pristine microspheres are highly hydrophilic and well-dispersed in water. They do not adsorb proteins and hydrophobic organic substances. Macropores may be generated in these particles by a simple modification of the emulsion procedure. These microspheres are also very good precursors for ceramic silicon oxycarbide microsphers because they retain their shape in pyrolytic processes even at high temperatures; and they give a high yield of ceramic material. The polysiloxane microspheres heated at 600 °C give micro and mezo porous materials with specific surface above 500 m2/g. When pyrolysed at temperatures 1000–1400 °C, they form solid ceramic microspheres of high strength. They retain spherical shape at 1500 °C although cracks are formed at their surfaces. Etching them with HF(aq) solution gives porous microspheres with specific surface above 1000 m2/g that is almost devoid of SiO2.