Hybrid Cache Designs for Reliable Hybrid High and Ultra-Low Voltage Operation

Abstract

Geometry scaling of semiconductor devices enables the design of ultra-low-cost (e.g., below 1 USD) battery-powered resource-constrained ubiquitous devices for environment, urban life, and body monitoring. These sensor-based devices require high performance to react in front of infrequent particular events as well as extreme energy efficiency in order to extend battery lifetime during most of the time when low performance is required. In addition, they require real-time guarantees. The most suitable technological solution for these devices consists of using hybrid processors able to operate at: (i) high voltage to provide high performance and (ii) near-/subthreshold voltage to provide ultra-low energy consumption. However, the most efficient SRAM memories for each voltage level differ and trading off different SRAM designs is mandatory. This is particularly true for cache memories, which occupy most of the processor's area. In this article, we propose new, simple, single-Vcc-domain hybrid L1 cache architectures suitable for reliable hybrid high and ultra-low voltage operation. In particular, the cache is designed by combining heterogeneous SRAM cell types: some of the cache ways are optimized to satisfy high-performance requirements during high voltage operation, whereas the rest of the ways provide ultra-low energy consumption and reliability during near-/subthreshold voltage operation. We analyze the performance, energy, and power impact of the proposed cache designs when using them to implement L1 caches in a processor. Experimental results show that our hybrid caches can efficiently and reliably operate across a wide range of voltages, consuming little energy at near-/subthreshold voltage as well as providing high performance at high voltage without decreasing reliability levels to provide strong performance guarantees, as required for our target market.