Abstract
An adaptive NiMoAl–Ag composite coating was deposited by high-velocity oxy fuel spraying, and its tribological properties from 20 to 800 °C under unlubricated conditions were evaluated using a CSM high-temperature tribometer. Scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to characterize the coating and corresponding wear tracks to determine the lubrication mechanisms. The results showed that the friction coefficient of the NiMoAl–Ag composite coating was around 0.3 from 20 to 600 °C and reached the lowest value of 0.09 at 800 °C. Meanwhile, wear rates of the coating were maintained on the order of 10−5 mm3/N m at the test temperatures except for 400 and 600 °C. Characterization of the NiMoAl–Ag coating revealed that silver provided lubrication below 400 °C. Ag2Mo2O7 and Ag2MoO4, which were formed through tribochemical reactions, acted as high-temperature lubricants above 400 °C. It was especially proposed that silver in a nearly molten state was effective in reducing the friction of the NiMoAl–Ag coating at 800 °C. Moreover, a comprehensive lubrication mechanism model of an NiMoAl–Ag composite coating at 800 °C was established to explain the extremely low friction coefficient and wear rate of the coating.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
