Abstract
A simple and rapid HPLC method requiring small volumes (250 microL) of human serum after C18 SPE sample preparation was developed using monolithic technology for simultaneous determination of all-trans-retinoic acid, 13-cis-retinoic acid, retinol, gamma- and alpha-tocopherol. The monolithic column, Chromolith Performance RP-18e (100x4.6 mm), was operated at ambient temperature. The mobile phase consisted of a mixture of acetonitrile (ACN) and 1% ammonium acetate in water (AMC) at pH 7.0. The mobile phase started at 98:2 (v/v) ACN/AMC (column pre-treatment) at a flow rate of 2 mL/min, then changed to 95:5 (v/v) ACN/AMC for 4 min at a flow rate of 1.5 mL/min and a further 3 min at a flow rate of 3.2 mL/min. Detection and identification were performed using a photodiode array detector. Retinol, 13-cis- and all-trans-retinoic acid were monitored at 325 nm. Both alpha- and gamma-tocopherol were detected at 295 nm. The total analysis time was 7.2 min. Tocol (synthesized tocopherol, not occurring in humans) was used as internal standard. The method was linear in the range of 0.125-10.00 micromol/L for all-trans-retinoic acid, 0.125-5.00 micromol/L for 13-cis-retinoic acid, 0.25-10.00 micromol/L for retinol, 0.5-50.00 micromol/L for gamma-tocopherol, and 0.5-50.00 micromol/L for alpha-tocopherol. The present method may be useful for monitoring of retinoids and tocopherols in clinical studies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
