Abstract
Oxide-confined top-emitting 850 nm and bottom-emitting 980 nm vertical-cavity surface-emitting laser (VCSEL) 8/spl times/8 arrays were designed and fabricated for applications of optical interconnects. The arrays were flip-chip bonded onto sapphire substrates that contain complimentary metal-oxide-semiconductor (CMOS) driver and fan-out circuitries. The off-sited bonding contacts and minimized bonding force produced very high yield of the hybridization process without causing damage to the VCSEL mesas. The hybridized devices were further mounted either on printed circuit board (PCB) or in 68-pin pin-grid-array (PGA) packages. The transparent sapphire substrate allowed optical outputs from the top-emitting VCSEL arrays to transmit directly through without additional substrate removal procedure. Lasing thresholds below 250 /spl mu/A for 850 nm VCSELs and 800 /spl mu/A for 980 nm VCSEL were found at room temperature. The oxide confinement apertures of VCSELs were measured to be around 6 /spl mu/m in diameter. High-speed data transmission demonstrated a bandwidth of up to 1 Gbits/s per channel for these hybridized VCSEL transmitters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Components and Packaging Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.