Abstract
In this study, a novel non-enzymatic glucose biosensor based on a simple photolithographic process is proposed. To fabricate the sensor, photoresist AZ-1518 was spin-coated onto a reclaimed silicon wafer, and then, a mask with a hexagonal close-packed circle array was employed for exposure and development to generate a hexagonal close-packed column array of AZ-1518. The diameter of each circle was set as 3μm. Subsequently, a thermal melting process was employed to convert each photoresist column into a photoresist hemisphere. A gold thin film was then sputtered onto the hemisphere array of AZ-1518 to form the sensing electrode. Finally, gold nanoparticles were deposited onto the gold thin film using a self-assembly monolayer method to enhance the sensing area. Measurements showed a 10.2-fold enhancement of the sensing area in comparison with a plain gold electrode. Actual detection of glucose demonstrated that the proposed non-enzymatic glucose biosensor can operate in a linear range of 55.6μM–13.89mM. It had a sensitivity of 749.2μAmM−1cm−2 and a detection limit of 9μM. The novel glucose biosensor proposed here has several advantages such as being enzyme free, simple to fabricate, low cost, and easy to preserve on a long-term basis. Thus, it can feasibly be used for future clinical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.