Abstract
Ultrahigh-nickel LiNixCoyMn1-x-yO2 cathode material (Ni content ≥ 0.9) is of great significance for the development of high energy density of lithium-ion batteries. However, its high surface activity leads to more surface residual lithium formation and deterioration of electrochemical performance, especially at high voltage. Here we add NH4F and nitrogen-doped carbon nanotubes (CNT) during the dimethyl carbonate (DMC) washing process, and constructed in situ the nano-LiF and CNT composite cathode electrolyte interphase (CEI) layer while removing part of residual lithium, effectively optimizing the surface environment of LiNi0.9Co0.05Mn0.05O2. The modified LiNi0.9Co0.05Mn0.05O2 has a capacity retention rate of 61.3 % after 200 cycles between 2.8 and 4.5 V at 1C, significantly higher than the 46.7 % of the unwashed sample, and a specific discharge capacity of 146.9 mAh g−1 at 5C, compared to 127.5 mAh g−1 for the unwashed sample. Benefit from the alleviation of polarization and the increase of Li+ diffusion coefficient, the stable CEI layer provides effective protection for LiNi0.9Co0.05Mn0.05O2 under 4.5 V, alleviating surface side reactions. In this paper, a simple and effective strategy is developed to optimize the surface of Ni-rich cathode material, which provides a new insight for the treatment of surface residual lithium.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.