Abstract
Spark plasma sintering (SPS) is employed to fabricate self-lubricating Al 2 O 3- SrSO 4 nanocomposites incorporated with and without Ag addition. The friction and wear properties have been evaluated using a high temperature friction and wear tester from room temperature to 600°C in dry sliding against alumina ball. X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with energy dispersive X-ray (EDX) analyzer were used to investigate microstructure and self-lubrication mechanisms of nanocomposites after wear tests at different temperatures. Al 2 O 3- SrSO 4 nanocomposites with optimum compositional combinations exhibit low and stable friction coefficients of 0.22 and wear rates in the order of 10-5 mm3/Nm at high temperatures. At low temperature, the Ag additives in the composite form a discontinuous lubricating film to effectively reduce friction and wear. With increasing test temperature, plastic deformation of SrSO 4 during sliding plays an important role in formation of lubricating films on worn surfaces to reduce the friction and wear.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.