Abstract

An optical characterization method with high spectral resolution for broadband, multilayer dielectric gratings working at the -1st reflection order is demonstrated in this paper. The diffraction-efficiency measurement setup for the broadband gratings with high efficiencies mainly consists of a double-light-path system with a monochromator as the illumination source and an automatic rotation stage for incident and diffraction angles adjustment. Two typical practical difficulties, namely (1) the mismatch between the spot size of diffracted light and the limited detector aperture and (2) the shared propagation path between the incident and diffracted light at the Littrow angle, were well solved. A fabricated multilayer dielectric grating was measured on the established measurement setup. Diffraction efficiencies greater than 90% in the wavelength range from 763 to 852 nm were obtained with an average relative deviation less than 1.0%. At the moment, the wavelength resolution is 1 nm and the angle resolution is 0.2 deg. The high-resolution broadband diffraction spectrometry testing method is applicable to characterizing broadband pulse compression gratings in the laser systems.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.