High-resolution simulation of coastal flooding under extreme storm tides and sea level rise: A case study of Macau

Abstract

Listen

Translate article

In the face of climate change, coastal cities are challenged with growing risks from rising sea levels and intensified storm surges which could turn urban areas into temporary waterways. To address this, our study developed a high-resolution coastal urban flood model, OUC-CUFM (Ocean University of China – Coastal Urban Flood Model), designed to help municipal governments make precise coastal flood forecasts and reduce potential threats to people and property. This model is based on two-dimensional nonlinear Navier–Stokes shallow water equations, incorporating factors like local acceleration, convection, bottom friction, wind stress, and shallow water effects. Using the finite difference method with upwind spatial discretization and a leapfrog time scheme, it can simulate detailed street-level water flow interactions with buildings. In a case study on Macau, we used a 5-m resolution digital elevation model to simulate storm tide flooding from Typhoons Hato (2017) and Mangkhut (2018), with the former for model calibration and the later for validation. Comparisons between simulated and observed water levels showed that the model accurately captured storm water arrival, overtopping, and flood extent and depth. The model also projected flood changes under sea level rise (SLR) scenarios of 0.5 m (by 2070) and 1.0 m (by 2100) for Typhoon Hato, indicating that such SLRs would significantly increase storm-induced flood depth and extent. This model serves as a valuable tool for street-scale flood risk analysis, hazard mapping, and assessing the impact of coastal defenses, like dyke upgrades or new dyke construction, in densely built coastal cities.