Abstract
Dry etching of iridium films using a TiN mask was studied with a gas mix in an inductively coupled plasma. The variations in etch rates and etch profiles of iridium films and TiN masks were investigated as a function of and concentrations. The etch rate of iridium film in this study was in the range 50-100 nm/min. It was found that the ratio of to concentration in an etch gas strongly influenced the etch selectivity of the iridium film relative to the TiN mask, which in turn impacted the etch profile of iridium films. By increasing coil power and bias voltage, or by decreasing gas pressure, the etch rate and selectivity of iridium films were increased and the etch profile was improved. Iridium etching with a residue-free steep sidewall of 70-80° was achieved. © 2003 The Electrochemical Society. All rights reserved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.