Abstract
This paper presents an experimental investigation of the hierarchical strengthening of composite T-shaped bonded joints using dual-length-scale reinforcements: carbon nanomaterials and carbon z-pins. The nanomaterials were carbon nanotubes (CNTs), carbon nanofibres (CNFs) and graphene nanoplatelets (GNPs), which were ∼ 10 nm – 200 μm in length whereas the z-pins were 510 μm (diameter) and 5 mm (length). T-joints were made by dispersing the nanomaterials in the polymer matrix phase and reinforcing with z-pins. The results of the stiffener pull-off tests revealed that all three nanomaterials are effective in increasing the onset failure strength, ultimate strength and energy absorption, with CNFs yielding the highest improvements in these joint properties. Among the three nanofillers, GNPs were found to be less effective at increasing the joint properties compared to CNTs and CNFs due to their shape, aspect ratio and size. Key strengthening mechanisms induced by combining nanoparticles with z-pins are identified which stem from greater energy absorption due to the interaction between the nanoparticles and z-pins.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
