Abstract
PurposePreparation of chelating resin to be used in the removal of heavy metal ions from solutions.Design/methodology/approachChelating resin based on poly (glycidyl‐methacrylate‐co‐N, N‐methylene‐bis‐acrylamide) containing ethylenediamine was synthesised and used in removal of heavy metals from solutions.FindingsThe optimal pH values for adsorption of different metal ions occur in the range 4.0‐10.0 depending on the metal ion used. The adsorption of metal ions increases with increasing treatment duration to reach to the equilibrium state. Also, the adsorption of metal ions depends on the degree of cross linking of the chelating resin, and a higher degree of cross linking results in a lower degree of metal ion adsorption. The chelating resin was highly effective for the collection of metal ions by batch and column methods. The metal ions adsorbed could be eluted with 2M HNO3 except Co2+ and the resin could be reused.Research limitations/implicationsThe different factors affecting the metal ions (Cu2+, Co2+, Cd2+, Zn2+, Pb2+ and Hg2+) loading in resin such as pH, contact time and cross linking density were studied.Practical implicationsThe practical applicability of the chelating resin for final stage of waste water treatment is recommended for use as a polishing agent.Originality/valueThe resins prepared were used successfully in removing heavy metals from water.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
