Abstract
Alkaline heat treatment was evaluated as a pretreatment process for increasing the anaerobic digestibility of municipal refuse. The goal was an increased methane yield from refuse lignocellulose. Batch digestibility assays were employed to ascertain the separate effects of solids concentration (0.79 - 10.0 percent), sodium hydroxide concentration (75 - 300 meq/l), and temperature (25 - 250°C) on the methane yield from refuse. Consumption of added alkali was observed and found to be relatively constant per unit mass of refuse solids. Various semi-continuous reactor configurations were evaluated. These studies resulted in investigation of a two-stage digestion system, with the second digester fed alkaline-heat-treated (180 meq/l NaOH, 200°C, 2.1 percent solids, 1 hour) effluent from the first. Such a system operated on newsprint was capable of increasing the methane yield by 80 percent, compared with the yield from a single-stage digester fed raw newsprint. A major limitation appears to be digester inhibition noticeable whenever the concentration of heat-treated lignin products exceeds 1 g/l.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
