Abstract
In the field of heat transfer in permanent magnet synchronous motors (PMSM) for electric vehicles, the boundary element method (BEM) has been applied for the first time to calculate the steady-state temperature of the PMSM with a spiral water-cooled system. In this investigation, the boundary-integration equation for the steady-state heat transfer problem of a water-cooled PMSM is first derived on the basis of thermodynamic theory, and the system of constant coefficient differential equations is obtained by discretizing its boundaries, while the temperature results obtained from the BEM are compared with the finite element method (FEM) results. Furthermore, the temperature distribution and heat transfer characteristics obtained from the FEM and BEM were verified twice using the PMSM prototype and test platform. The results show that the maximum relative error between the temperature calculation results of FEM and BEM is 1.97%, and the maximum relative error between the results of BEM and the test does not exceed 3%, which finally verifies the validity and accuracy of BEM in solving the heat transfer problems of water-cooled PMSM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.