Abstract
Heat transfer characteristics of a low temperature latent heat storage system have been determined for the circular finned and unfinned tubes using sodium acetate trihydrate as a phase change material (PCM). In the heat storage stage (melting process). the PCM heat transfer coefficient in the unfinned-tube system showed good agreement with the calculated value by the heat conduction equation. The heat transfer between the tube wall and the PCM was not enhanced by the fins in the thin-finned-tube system, whereas 2 times higher heat-transfer coefficient for the thick-finned-tube system over the unfinned-tube system was obtained. The experimentally determined heattransfer coefficients in the unfinned-tube and thick-finned-tube systems are in the ranges of 40–170 and 80–320 W/m2-k, respectively. The amount of heat storage for three systems has been correlated in terms of Fourier, Stefan and Reynolds numbers. The thermal performance of heat storage systems are found to be strongly dependent on the
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
