Abstract
Hard X-ray imaging by a spherical compound refractive lens is presented. The lens is composed of 123 biconcave microlenses with a size of 200 μm in diameter. Each microlens was formed by the epoxy between two bubbles, which were injected into an epoxy-filled glass capillary. The focal length of the lens is 114 mm at 8.05 keV. The light source was obtained by using a copper anode X-ray tube without a filter. The lens can be achieved a spatial resolution of 5 μm with field of view of about 700 μm, and 1–3 μm resolution may be obtainable by using monochromator and diaphragm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.