Abstract
This work reports a simultaneous improvement in both the hardness and toughness of an alumina Al2O3-SiC-CNTs hybrid ceramic nanocomposite. The nanocomposite powder was synthesized using sonication and molecular level mixing (MLM) and was sintered at 1500, 1550, and 1600 °C for 10 min by the spark plasma sintering (SPS) method. The influence of sintering temperature on the microstructure and properties was investigated. The dispersion of silicon carbide (SiC) nanoparticles and carbon nanotubes (CNT) in the powder and consolidated samples was characterized using a field emission scanning electron microscope equipped with energy dispersive spectroscopy. The microhardness and fracture toughness of the samples were measured using a hardness tester. The synthesized nanopowder and the consolidated samples revealed a uniform distribution of the SiC and CNT reinforcements. The relative density of the sintered samples increased from 90.36 to 98.91% as a result of an increase in sintering temperature from 1500 to 1600 °C. The Al2O3-5SiC-1CNTs sample, which was sintered at 1600 °C for 10 min, possessed the highest hardness and fracture toughness values of 23.32 GPa and 7.10 MPa.m1/2, respectively. This finding constitutes an increase in the hardness and fracture toughness of 25.65 and 96.67%, respectively, compared to monolithic alumina sintered at 1500 °C for 10 min.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
