Abstract
We used low-cost ultrasonic spray pyrolysis to prepare fluorine-doped tin oxide film from 470 to 590°C in 30°C increments with air and nitrogen as carrier gas. The film had 86.4% optical transparency and 16.8 Ω/□ electrical resistivity. The quality factor was defined as average optical transmittance to the 10th power divided by square resistance. The quality factor for one film fabricated at 590°C was 139 × 10−4/Ω, which is acceptable for many commercial applications. Detailed analysis indicates that the optical and electrical properties are greatly influenced by the film microstructure which is a function of temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
