Abstract
ABSTRACTCellulose nanocrystals (CNC) were prepared from curauá fibers via acid hydrolysis, and used as reinforcing phase for high‐density biopolyethylene (HDBPE) or green polyethylene. Castor oil (CO), epoxidized soybean oil (ESO) and epoxidized linseed oil (ELO) were chosen as compatibilizers for this study. Nanocomposites reinforced with CNC (3, 6, and 9 wt %) were processed by extrusion, using CO (3, 6, and 9 wt %) to evaluate its action as CNC dispersing agent in the HDBPE matrix. From the results obtained for these films, the CNC and oil contents were set at 3 wt%. In addition to CO, ELO, and ESO were also used, and besides processing by extrusion, extrusion/hot‐pressing process was also considered, in order to compare the two processing techniques. The nanocomposites were characterized by microscopic, thermal, mechanical, and rheological analyses. The presence of oil leads to less opaque films and improved dispersion. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015, 53, 1010–1019
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Polymer Science Part B: Polymer Physics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.