Green and Sustainable Semiconductor Manufacturing from the Point of View of Greenhouse Gas Emissions

Major US electric utility climate pledges have the potential to collectively reduce power sector emissions by one-third

Mitigating Curtailment and Carbon Emissions through Load Migration between Data Centers

Energy-related activities are a major contributor of greenhouse gas (GHG) emissions. A growing body of knowledge clearly depicts the links between human activities and climate change. Over the last century the burning of fossil fuels such as coal and oil and other human activities has released carbon dioxide (CO2) emissions and other heat-trapping GHG emissions into the atmosphere and thus increased the concentration of atmospheric CO2 emissions. The main human activities that emit CO2 emissions are (1) the combustion of fossil fuels to generate electricity, accounting for about 37% of total U.S. CO2 emissions and 31% of total U.S. GHG emissions in 2013, (2) the combustion of fossil fuels such as gasoline and diesel to transport people and goods, accounting for about 31% of total U.S. CO2 emissions and 26% of total U.S. GHG emissions in 2013, and (3) industrial processes such as the production and consumption of minerals and chemicals, accounting for about 15% of total U.S. CO2 emissions and 12% of total ...

Rivers play an important role in greenhouse gas emissions. Over the past decade, because of global urbanization trends, rapid land use changes have led to changes in river ecosystems that have had a stimulating effect on the greenhouse gas production and emissions. Presently, there is an urgent need for assessments of the greenhouse gas concentrations and emissions in watersheds. Therefore, this study was designed to evaluate river-based greenhouse gas emissions and their spatial-temporal features as well as possible impact factors in a rapidly urbanizing area. The specific objectives were to investigate how river greenhouse gas concentrations and emission fluxes are responding to urbanization in the Liangtan River, which is not only the largest sub-basin but also the most polluted one in Chongqing City. The thin layer diffusion model method was used to monitor year-round concentrations of pCO2, CH4, and N2O in September and December 2014, and March and June 2015. The pCO2 range was (23.38±34.89)-(1395.33±55.45) Pa, and the concentration ranges of CH4 and N2O were (65.09±28.09)-(6021.36±94.36) nmol·L-1 and (29.47±5.16)-(510.28±18.34) nmol·L-1, respectively. The emission fluxes of CO2, CH4, and N2O, which were calculated based on the method of wind speed model estimations, were -6.1-786.9, 0.31-27.62, and 0.06-1.08 mmol·(m2·d)-1, respectively. Moreover, the CO2 and CH4 emissions displayed significant spatial differences, and these were roughly consistent with the pollution load gradient. The greenhouse gas concentrations and fluxes of trunk streams increased and then decreased from upstream to downstream, and the highest value was detected at the middle reaches where the urbanization rate is higher than in other areas and the river is seriously polluted. As for branches, the greenhouse gas concentrations and fluxes increased significantly from the upstream agricultural areas to the downstream urban areas. The CO2 fluxes followed a seasonal pattern, with the highest CO2 emission values observed in autumn, then successively winter, summer, and spring. The CH4 fluxes were the highest in spring and the lowest in summer, while N2O flux seasonal patterns were not significant. Because of the high carbon and nitrogen loads in the basin, the CO2 products and emissions were not restricted by biogenic elements, but levels were found to be related to important biological metabolic factors such as the water temperature, pH, DO, and chlorophyll a. The carbon, nitrogen, and phosphorus content of the water combined with sewage input influenced the CH4 products and emissions. Meanwhile, N2O production and emissions were mainly found to be driven by urban sewage discharge with high N2O concentrations. Rapid urbanization accelerated greenhouse gas emissions from the urban rivers, so that in the urban reaches, CO2/CH4 fluxes were twice those of the non-urban reaches, and all over the basin N2O fluxes were at a high level. These findings illustrate how river basin urbanization can change aquatic environments and aggravate allochthonous pollution inputs such as carbon, nitrogen, and phosphorus, which in turn can dramatically stimulate river-based greenhouse gas production and emissions; meanwhile, spatial and temporal differences in greenhouse gas emissions in rivers can lead to the formation of emission hotspots.

Taking Stock of Strategies on Climate Change and the Way Forward: A Strategic Climate Change Framework for Australia

BackgroundSocietal pressures exist to reduce greenhouse gas (GHG) emissions from farm animals, especially in beef cattle. Both total GHG and GHG emissions per unit of product decrease as productivity increases. Limitations of previous studies on GHG emissions are that they generally describe feed intake inadequately, assess the consequences of selection on particular traits only, or examine consequences for only part of the production chain. Here, we examine GHG emissions for the whole production chain, with the estimated cost of carbon included as an extra cost on traits in the breeding objective of the production system.MethodsWe examined an example beef production system where economic merit was measured from weaning to slaughter. The estimated cost of the carbon dioxide equivalent (CO2-e) associated with feed intake change is included in the economic values calculated for the breeding objective traits and comes in addition to the cost of the feed associated with trait change. GHG emission effects on the production system are accumulated over the breeding objective traits, and the reduction in GHG emissions is evaluated, for different carbon prices, both for the individual animal and the production system.ResultsMultiple-trait selection in beef cattle can reduce total GHG and GHG emissions per unit of product while increasing economic performance if the cost of feed in the breeding objective is high. When carbon price was $10, $20, $30 and $40/ton CO2-e, selection decreased total GHG emissions by 1.1, 1.6, 2.1 and 2.6% per generation, respectively. When the cost of feed for the breeding objective was low, selection reduced total GHG emissions only if carbon price was high (~ $80/ton CO2-e). Ignoring the costs of GHG emissions when feed cost was low substantially increased emissions (e.g. 4.4% per generation or ~ 8.8% in 10 years).ConclusionsThe ability to reduce GHG emissions in beef cattle depends on the cost of feed in the breeding objective of the production system. Multiple-trait selection will reduce emissions, while improving economic performance, if the cost of feed in the breeding objective is high. If it is low, greater growth will be favoured, leading to an increase in GHG emissions that may be undesirable.

Well-to-wheel greenhouse gas emissions of electric versus combustion vehicles from 2018 to 2030 in the US

The decrease in the level of greenhouse gas (GHG) emissions from industry and agriculture is one of the biggest challenges that European Union (EU) countries have to face. Their economic development should occur under the conditions of limiting the pressure on the environment. The agricultural and industrial sectors play a key role in ensuring food security, technological progress, job security, social well-being, economic competitiveness, and sustainable development. The main purpose of this article was to identify and compare the level, trends, and variability in greenhouse gas emissions from industry and agriculture in EU countries in 2010–2019, to create classes of countries with similar gas emissions, and to analyze the average values of their economic conditions. The original contribution to the article was to investigate whether there is a relationship between the level of greenhouse gas emissions and the economic development of countries and other economic indicators characterizing the sectors of industry and agriculture. Empirical data were obtained from the Eurostat and Ilostat databases. Basic descriptive statistics, classification methods, multiple regression, and correlation methods were used in the study. The industrial and agricultural sectors in EU countries emit similar amounts of greenhouse gases into the environment. In the years 2010–2019, the percentage share of emissions from these sectors in total gas emissions was growing dynamically, but no evidence was found indicating that those countries that emitted the most greenhouse gases significantly reduced their emissions in the decade under review. Moreover, EU countries are still significantly and invariably differentiated in this respect. Greenhouse gas emissions from industry and agriculture are influenced by the economic characteristics of these sectors, such as the level of GDP per capita, the scale of investment by enterprises, the expenditure on research and development, as well as employment in these sectors. The findings of this study show that total greenhouse gas emissions from all sources increase with countries’ economic growth, while a higher level of support of EU countries for research and development, and a greater share of employment in both industry and agriculture, translate into higher greenhouse gas emissions from these sectors. These conclusions may be useful for decision makers in developed and developing countries, as well as those in the industrial and agricultural sectors, in controlling and verifying the possible causes of greenhouse gas emissions in terms of the need to reduce their negative role on the environment and human health.

Executive Summary: The California Climate Action Registry, which was initially established in 2000 and began operation in Fall 2002, is a voluntary registry for recording annual greenhouse gas (GHG) emissions. The purpose of the Registry is to assist California businesses and organizations in their efforts to inventory and document emissions in order to establish a baseline and to document early actions to increase energy efficiency and decrease GHG emissions. The State of California has committed to use its ''best efforts'' to ensure that entities that establish GHG emissions baselines and register their emissions will receive ''appropriate consideration under any future international, federal, or state regulatory scheme relating to greenhouse gas emissions.'' Reporting of GHG emissions involves documentation of both ''direct'' emissions from sources that are under the entity's control and indirect emissions controlled by others. Electricity generated by an off-site power source is consider ed to be an indirect GHG emission and is required to be included in the entity's report. Registry participants include businesses, non-profit organizations, municipalities, state agencies, and other entities. Participants are required to register the GHG emissions of all operations in California, and are encouraged to report nationwide. For the first three years of participation, the Registry only requires the reporting of carbon dioxide (CO2) emissions, although participants are encouraged to report the remaining five Kyoto Protocol GHGs (CH4, N2O, HFCs, PFCs, and SF6). After three years, reporting of all six Kyoto GHG emissions is required. The enabling legislation for the Registry (SB 527) requires total GHG emissions to be registered and requires reporting of ''industry-specific metrics'' once such metrics have been adopted by the Registry. The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) was asked to provide technical assistance to the California Energy Commission (Energy Commission) related to the Registry in three areas: (1) assessing the availability and usefulness of industry-specific metrics, (2) evaluating various methods for establishing baselines for calculating GHG emissions reductions related to specific actions taken by Registry participants, and (3) establishing methods for calculating electricity CO2 emission factors. The third area of research was completed in 2002 and is documented in Estimating Carbon Dioxide Emissions Factors for the California Electric Power Sector (Marnay et al., 2002). This report documents our findings related to the first areas of research. For the first area of research, the overall objective was to evaluate the metrics, such as emissions per economic unit or emissions per unit of production that can be used to report GHG emissions trends for potential Registry participants. This research began with an effort to identify methodologies, benchmarking programs, inventories, protocols, and registries that u se industry-specific metrics to track trends in energy use or GHG emissions in order to determine what types of metrics have already been developed. The next step in developing industry-specific metrics was to assess the availability of data needed to determine metric development priorities. Berkeley Lab also determined the relative importance of different potential Registry participant categories in order to asses s the availability of sectoral or industry-specific metrics and then identified industry-specific metrics in use around the world. While a plethora of metrics was identified, no one metric that adequately tracks trends in GHG emissions while maintaining confidentiality of data was identified. As a result of this review, Berkeley Lab recommends the development of a GHG intensity index as a new metric for reporting and tracking GHG emissions trends.Such an index could provide an industry-specific metric for reporting and tracking GHG emissions trends to accurately reflect year to year changes while protecting proprietary data. This GHG intensity index changes while protecting proprietary data. This GHG intensity index would provide Registry participants with a means for demonstrating improvements in their energy and GHG emissions per unit of production without divulging specific values. For the second research area, Berkeley Lab evaluated various methods used to calculate baselines for documentation of energy consumption or GHG emissions reductions, noting those that use industry-specific metrics. Accounting for actions to reduce GHGs can be done on a project-by-project basis or on an entity basis. Establishing project-related baselines for mitigation efforts has been widely discussed in the context of two of the so-called ''flexible mechanisms'' of the Kyoto Protocol to the United Nations Framework Convention on Climate Change (Kyoto Protocol) Joint Implementation (JI) and the Clean Development Mechanism (CDM).

BackgroundPolicies to mitigate climate change by reducing greenhouse gas (GHG) emissions can yield public health benefits by also reducing emissions of hazardous co-pollutants, such as air toxics and particulate matter. Socioeconomically disadvantaged communities are typically disproportionately exposed to air pollutants, and therefore climate policy could also potentially reduce these environmental inequities. We sought to explore potential social disparities in GHG and co-pollutant emissions under an existing carbon trading program—the dominant approach to GHG regulation in the US and globally.Methods and findingsWe examined the relationship between multiple measures of neighborhood disadvantage and the location of GHG and co-pollutant emissions from facilities regulated under California’s cap-and-trade program—the world’s fourth largest operational carbon trading program. We examined temporal patterns in annual average emissions of GHGs, particulate matter (PM2.5), nitrogen oxides, sulfur oxides, volatile organic compounds, and air toxics before (January 1, 2011–December 31, 2012) and after (January 1, 2013–December 31, 2015) the initiation of carbon trading. We found that facilities regulated under California’s cap-and-trade program are disproportionately located in economically disadvantaged neighborhoods with higher proportions of residents of color, and that the quantities of co-pollutant emissions from these facilities were correlated with GHG emissions through time. Moreover, the majority (52%) of regulated facilities reported higher annual average local (in-state) GHG emissions since the initiation of trading. Neighborhoods that experienced increases in annual average GHG and co-pollutant emissions from regulated facilities nearby after trading began had higher proportions of people of color and poor, less educated, and linguistically isolated residents, compared to neighborhoods that experienced decreases in GHGs. These study results reflect preliminary emissions and social equity patterns of the first 3 years of California’s cap-and-trade program for which data are available. Due to data limitations, this analysis did not assess the emissions and equity implications of GHG reductions from transportation-related emission sources. Future emission patterns may shift, due to changes in industrial production decisions and policy initiatives that further incentivize local GHG and co-pollutant reductions in disadvantaged communities.ConclusionsTo our knowledge, this is the first study to examine social disparities in GHG and co-pollutant emissions under an existing carbon trading program. Our results indicate that, thus far, California’s cap-and-trade program has not yielded improvements in environmental equity with respect to health-damaging co-pollutant emissions. This could change, however, as the cap on GHG emissions is gradually lowered in the future. The incorporation of additional policy and regulatory elements that incentivize more local emission reductions in disadvantaged communities could enhance the local air quality and environmental equity benefits of California’s climate change mitigation efforts.

Better information on greenhouse gas (GHG) emissions and mitigation potential in the agricultural sector is necessary to manage these emissions and identify responses that are consistent with the food security and economic development priorities of countries. Critical activity data (what crops or livestock are managed in what way) are poor or lacking for many agricultural systems, especially in developing countries. In addition, the currently available methods for quantifying emissions and mitigation are often too expensive or complex or not sufficiently user friendly for widespread use.The purpose of this focus issue is to capture the state of the art in quantifying greenhouse gases from agricultural systems, with the goal of better understanding our current capabilities and near-term potential for improvement, with particular attention to quantification issues relevant to smallholders in developing countries. This work is timely in light of international discussions and negotiations around how agriculture should be included in efforts to reduce and adapt to climate change impacts, and considering that significant climate financing to developing countries in post-2012 agreements may be linked to their increased ability to identify and report GHG emissions (Murphy et al 2010, CCAFS 2011, FAO 2011).

Dairy production systems represent a significant source of air pollutants such as greenhouse gases (GHG), that increase global warming, and ammonia (NH3), that leads to eutrophication and acidification of natural ecosystems. Greenhouse gases and ammonia are emitted both by conventional and organic dairy systems. Several studies have already been conducted to design practices that reduce greenhouse gas and ammonia emissions from dairy systems. However, those studies did not consider options specifically applied to organic farming, as well as the multiple trade-offs occurring between these air pollutants. This article reviews agricultural practices that mitigate greenhouse gas and ammonia emissions. Those practices can be applied to the most common organic dairy systems in northern Europe such as organic mixed crop-dairy systems. The following major points of mitigation options for animal production, crop production and grasslands are discussed. Animal production: the most promising options for reducing greenhouse gas emissions at the livestock management level involve either the improvement of animal production through dietary changes and genetic improvement or the reduction of the replacement rate. The control of the protein intake of animals is an effective means to reduce gaseous emissions of nitrogen, but it is difficult to implement in organic dairy farming systems. Considering the manure handling chain, mitigation options involve housing, storage and application. For housing, an increase in the amounts of straw used for bedding reduces NH3 emissions, while the limitation of CH4 emissions from deep litter is achieved by avoiding anaerobic conditions. During the storage of solid manure, composting could be an efficient mitigation option, depending on its management. Addition of straw to solid manure was shown to reduce CH4 and N2O emissions from the manure heaps. During the storage of liquid manure, emptying the slurry store before late spring is an efficient mitigation option to limit both CH4 and NH3 emissions. Addition of a wooden cover also reduces these emissions more efficiently than a natural surface crust alone, but may increase N2O emissions. Anaerobic digestion is the most promising way to reduce the overall greenhouse gas emissions from storage and land spreading, without increasing NH3 emissions. At the application stage, NH3 emissions may be reduced by spreading manure during the coolest part of the day, incorporating it quickly and in narrow bands. Crop production: the mitigation options for crop production focus on limiting CO2 and N2O emissions. The introduction of perennial crops or temporary leys of longer duration are promising options to limit CO2 emissions by storing carbon in plants or soils. Reduced tillage or no tillage as well as the incorporation of crop residues also favour carbon sequestration in soils, but these practices may enhance N2O emissions. Besides, the improvement of crop N-use efficiency through effective management of manure and slurry, by growing catch crops or by delaying the ploughing of leys, is of prime importance to reduce N2O emissions. Grassland: concerning grassland and grazing management, permanent conversion from arable to grassland provides high soil carbon sequestration while increasing or decreasing the livestock density seems not to be an appropriate mitigation option. From the study of the multiple interrelations between gases and between farm compartments, the following mitigation options are advised for organic mixed crop-dairy systems: (1) actions for increasing energy efficiency or fuel savings because they are beneficial in any case, (2) techniques improving efficiency of N management at field and farm levels because they affect not only N2O and NH3 emissions, but also nitrate leaching, and (3) biogas production through anaerobic digestion of manure because it is a promising efficient method to mitigate greenhouse gas emissions, even if the profitability of this expensive investment needs to be carefully studied. Finally, the way the farmer implements the mitigation options, i.e. his practices, will be a determining factor in the reduction of greenhouse gas and NH3 emissions.

An integrated analytical framework for quantifying the LCOE of waste-to-energy facilities for a range of greenhouse gas emissions policy and technical factors

Kupang city is growth rapidly and located in a strategic position between Australia and Timor Leste. A sharp increase of GHG emission along with environmental pollution, contamination of water, air and improper waste disposal practices as its consequence to the global environment. The city's government ambition to evaluate impact of economic activity on greenhouse gases (GHG) emission contribution. This paper outlined pollutant sectors that contribute substantially to GHG emission in Kupang along with its structure, and count an estimated amount of emission coefficients for 27 economy sectors. More in-depth explanation about indirect coefficient pollutant emission which beneficial not only for calculation of the emission amount but more as inventory data for LCA. The paper is investigated review the trends of some priority sectors, then introduction of indirect coefficients of pollutant sectors, and showed the Pollutant Emission Structure for Kupang. After that, an estimated amount of Kupang GHG emission under BAU is also counted and confirmed. The paper only considers GHG emission issues while air pollutant emission only be provided as inventory data but will not be used as exogenous data for this paper. In the final part a brief explanation and implications of GHG emission policy in Kupang are identified. A detailed of input-output data for individual process are provided includes all groups of processes or industry sectors relevant to economy activities in Kupang City. A time period for Global Warming Potential (GWP) 20 year and 100 years are used to forecasted amounts share of total GHG emission in Kupang and Indonesia by 2020 compared to 2010. As results first, the GHG emission and air pollutant coefficients for 27 sectors in Kupang based on method is presented in NIES which use to count the GHG emission. These also become an Inventory data for researchers of regional science in Indonesia, however, geography and socioeconomic conditions in every region is different, so that some criteria will be applied. Second, found total GHG emission in Kupang is $1.0164\mathrm{x} 10^{-3}$ Gt or around 0.047% compared to total GHG emission by 2010 and 0.034% compared to total GHG emission by 2020 in Indonesia. The study suggests to government consider a proper method in decide a reliable environmental policy and technical measures to reach GHG emission targets by 2020. Third, total share of CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> e in Indonesia emitted from Kupang for GWP 20 years and 100 years respectively were came out as follow.

Plug-in hybrid electric vehicles (PHEVs) have potential to reduce greenhouse gas (GHG) emissions in the U.S. light-duty vehicle fleet. GHG emissions from PHEVs and other vehicles depend on both vehicle design and driver behavior. We pose a twice-differentiable, factorable mixed-integer nonlinear programming model utilizing vehicle physics simulation, battery degradation data, and U.S. driving data to determine optimal vehicle design and allocation for minimizing lifecycle greenhouse gas (GHG) emissions. The resulting nonconvex optimization problem is solved using a convexification-based branch-and-reduce algorithm, which achieves global solutions. In contrast, a randomized multistart approach with local search algorithms finds global solutions in 59% of trials for the two-vehicle case and 18% of trials for the three-vehicle case. Results indicate that minimum GHG emissions is achieved with a mix of PHEVs sized for around 35 miles of electric travel. Larger battery packs allow longer travel on electric power, but additional battery production and weight result in higher GHG emissions, unless significant grid decarbonization is achieved. PHEVs offer a nearly 50% reduction in life cycle GHG emissions relative to equivalent conventional vehicles and about 5% improvement over ordinary hybrid electric vehicles. Optimal allocation of different vehicles to different drivers turns out to be of second order importance for minimizing net life cycle GHGs.