GGR Handbook of Rock and Mineral Analysis Chapter 1 (Part 2) Sampling as Part of the Measurement Process

Abstract

This chapter (Sampling as Part of the Measurement Process) is a contribution to the Geostandards and Geoanalytical Research Handbook of Rock and Mineral Analysis – an online textbook that is a fully revised and updated edition of A Handbook of Silicate Rock Analysis (P. J. Potts, 1987, Blackie, Glasgow).Chapter 1 (Part 2) forms part of Section 1 of the handbook dealing with fundamentals of measurement and instrument design. The geochemical measurement process is considered to begin when the primary sample is taken from the sampling target, rather than when that sample arrives at the laboratory. This integration of sampling within the measurement procedure enables both sampling and chemical analysis to be optimised in order to achieve a measurement procedure that is fit for its intended geochemical purpose. The key metric in judging this fitness for purpose, and hence validating a measurement procedure, is the uncertainty of each measurement value. This measurement uncertainty is explained, together with methods to estimate and express it in a way that includes the contribution from sampling, with a worked example. The resultant more realistic estimates of measurement uncertainty are shown to improve the reliability of the geochemical interpretation of measurement values.